glitcher0 Posted February 8, 2022 Report Posted February 8, 2022 Hi, I am having some problems with my leapfrog 48 where about 2/3 months ago we had in the macros panel when we selected a vari-lite 2500 Wash there would be a option to lamp on and lamp off but about 2 months ago those 2 options disappeared and now I have to go into beamshape and do it manually but that is quite an inconvenience. In the macro tab now I don't even have the option to generate new macros, the screen on the board is blank. What can I do to bring them back? Quote
Edward Z88 Posted February 9, 2022 Report Posted February 9, 2022 Hi @glitcher0 The VariLite VL2500 Wash fixture personality has 4 fixture macros available: [Fixture Display 100%] [Fixture Global Reset] [Lamp Off] [Lamp On] These will be created after patching the fixture and tapping Automatically Create Macros in the Macros window. If this doesn't appear to be working for you, please email us a copy of your show file to support@zero88.com, and we will take a look. Edward Quote Edward Smith Product Specialist Email Support
glitcher0 Posted February 9, 2022 Author Report Posted February 9, 2022 Hi @Edward Z88 on the macro tab on the board we have no macro options for any of our lights as well as not having the button to create macros, it is completely blank Quote
Edward Z88 Posted February 9, 2022 Report Posted February 9, 2022 Hi @glitcher0 16 minutes ago, glitcher0 said: on the macro tab on the board we have no macro options for any of our lights as well as not having the button to create macros, it is completely blank Please could you confirm the current software version installed on your console? If you haven't created any custom macros, I would recommend clearing all fixture macros. To do this tap SETUP -> Clear Options -> Clear Macros. Then, exit SETUP, and hold SHIFT and tap MACRO, to open the Macros window. You should see a Automatically Create Macros button available if your fixtures have fixture macros available. If you save a copy of your show file to a USB drive and email this to us, we can investigate. If you have any questions, please let me know. Edward Quote Edward Smith Product Specialist Email Support
glitcher0 Posted February 9, 2022 Author Report Posted February 9, 2022 Thank you @Edward Z88 All I had to do was shift macros as it was not on the board but on the screen, thank you! Quote
Edward Z88 Posted February 9, 2022 Report Posted February 9, 2022 Hi @glitcher0 1 hour ago, glitcher0 said: Thank you @Edward Z88 All I had to do was shift macros as it was not on the board but on the screen, thank you! Thank you for the update, pleased to hear you can now access your macros. Let us know if there’s anything else we can help with. Edward Quote Edward Smith Product Specialist Email Support
glitcher0 Posted February 10, 2022 Author Report Posted February 10, 2022 Just one more question @Edward Z88 Where can I get the latest version of OS for the leapfrog 48? Thanks! Quote
Edward Z88 Posted February 11, 2022 Report Posted February 11, 2022 Hi @glitcher0 If you wish to control multicell fixtures with your Leapfrog console, I'd recommend installing ZerOS 7.10, available from the link below... https://zero88.com/storage/downloads/0b68ecc6-9829-4000-b469-63b94a0c62c3/ZerOS-7.10.exe If you do not wish to control multicell fixtures, ZerOS 7.9.9.5 software can be downloaded from the link below... https://zero88.com/storage/downloads/607844fa-0fdf-401a-9e42-29c8fac4e7bf/ZerOS-7.9.9.5.zip Installation instructions are available here... https://zero88.com/manuals/zeros/setup/load/zeros-software Hope this helps, Edward Quote Edward Smith Product Specialist Email Support
glitcher0 Posted February 12, 2022 Author Report Posted February 12, 2022 Hi @Edward Z88 Can you explain what multicell is please? Thanks Quote
Edward Z88 Posted February 14, 2022 Report Posted February 14, 2022 Hi @glitcher0 On 2/12/2022 at 8:35 PM, glitcher0 said: Hi @Edward Z88 Can you explain what multicell is please? Thanks A "multicell" fixture, is a single fixture with multiple light outputs, that can each be controlled individually. For information on multicell fixtures, please watch the video below... For more information, please see the link below... https://zero88.com/manuals/zeros/controlling-fixtures/multicell-fixtures I hope this helps. If you have any questions, please let us know. Edward Quote Edward Smith Product Specialist Email Support
glitcher0 Posted July 18, 2022 Author Report Posted July 18, 2022 On 2/11/2022 at 9:35 AM, Edward Z88 said: Hi @glitcher0 If you wish to control multicell fixtures with your Leapfrog console, I'd recommend installing ZerOS 7.10, available from the link below... https://zero88.com/storage/downloads/0b68ecc6-9829-4000-b469-63b94a0c62c3/ZerOS-7.10.exe If you do not wish to control multicell fixtures, ZerOS 7.9.9.5 software can be downloaded from the link below... https://zero88.com/storage/downloads/607844fa-0fdf-401a-9e42-29c8fac4e7bf/ZerOS-7.9.9.5.zip Installation instructions are available here... https://zero88.com/manuals/zeros/setup/load/zeros-software Hope this helps, Edward Hi, Its been a longtime but I am now getting around to updating the desk. I see 7.12 is out now, will that work on my desk? Quote
Edward Z88 Posted July 18, 2022 Report Posted July 18, 2022 Hi @glitcher0 4 minutes ago, glitcher0 said: Hi, Its been a longtime but I am now getting around to updating the desk. I see 7.12 is out now, will that work on my desk? Yes - ZerOS 7.12 software is available for Leapfrog consoles. ZerOS 7.12 can be downloaded from the link below, along with release notes... https://zero88.com/zeros#download Hope this helps. Edward Quote Edward Smith Product Specialist Email Support
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.