Jump to content
Vari-Lite Controls Support Forum

ZerOS 7.12 Released


Jon Hole

Recommended Posts

Dear All,

We’re excited to announce the availability of ZerOS 7.12, a new update for consoles and servers running the ZerOS Operating System.

New Features include:

  • KiNET support
  • Vision.Net support
  • Philips Hue support
  • Updated fonts & improved font rendering
  • ZerOS Library 3.2
  • Various enhancements and bug fixes

Please see the Release Notes for full details. The Online Manual has also been updated to support all the new features: https://zero88.com/manuals/zeros

ZerOS 7.12, Phantom ZerOS 7.12 (offline editor) and the Release Notes can be found at zero88.com/zeros

If you have any questions, please don't hesitate to contact us at support@zero88.com

Kind regards,

Jon

  • Like 2
  • Thanks 1

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

Very good thing and thank a lot.

Three Update in 8 month... Great for us.

 

So I will have a last performance before holidays.

 

So I Did every performance with 7.11 and having no problems.

I use since June the same configuration (just changing some DMX address and Erasing CUES when I was making a new show. )

But all was stable and I having no Bug !

Using 2 universes with Leds, Moving Wash & Spot, using traditional projector... And all was working good !

 

So I well try 7.12 in August (after hollydays) & I will continue French traduction & wishing to continue to doing French Video Helping...

So take care & good things for you dear Jon & also for Edward too,

Eric from France

  • Like 2

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 4 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 4 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W   // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w  // 7 LY 400 - BSW CMY LED 400w

Link to comment
Share on other sites

On 7/7/2022 at 7:29 PM, van den abbeele Eric said:

Three Update in 8 month... Great for us.

It’s been lovely to speed up releases now that two+ years of big “behind the scenes” changes are complete (library, multi-cell, multi-emitter). Looking forward to the next release, targeting within the next two months!

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

Good thing indeed to have a more sustained update rate. Everything is despite the security for users to have enough people in your teams to check that everything is going well with the FLX and FLX'S...

I can remember chaotic updates with Apple and multiple crashes around the world... For my part, I had always taken the habit of waiting a good year before moving forward and very often that also saved me from big crashes...

Yesterday (with 7.11) I had problems, impossible to save on USB keys (Zero88 Key).
for the past two months, I have been systematically recording on 2 different keys.
And the second key worked.
I had my Mac with me, did a little cleaning on the Zero88 keys, did a little vacuum and was able to do the recording again... The red lines of code indicating that the recording on the USB key in question was impossible then disappeared...

But I had a heat stroke...

beautiful end of the day

Eric

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 4 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 4 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W   // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w  // 7 LY 400 - BSW CMY LED 400w

Link to comment
Share on other sites

Hi Jon,

Tried ZerOS 7.12 on an event this weekend (full size FLX), had the most peculiar issue where I had a 'dead' touchscreen zone on my external montior. I tried recalibrating several times to no joy. I ended up downgrading to ZOS 7.11 which then worked OK. Dead zone confirmed by using the 'draw' function after calibrating the screen; it was a diagonal zone extending from the bottom right corner.

Touch screen is an Iiyama T2252MTS-3.

Desk is out on another job this week, but will try some more testing when it is back on ZOS 7.12 again. 

I also thought the desk was maybe a bit more 'hang-y' when changing between setup and attribute pages than previously. 

Cheers,

Alex

Link to comment
Share on other sites

Hi Alex,

On 7/11/2022 at 4:38 PM, scottydog75 said:

Tried ZerOS 7.12 on an event this weekend (full size FLX), had the most peculiar issue where I had a 'dead' touchscreen zone on my external montior. I tried recalibrating several times to no joy. I ended up downgrading to ZOS 7.11 which then worked OK. Dead zone confirmed by using the 'draw' function after calibrating the screen; it was a diagonal zone extending from the bottom right corner.

Touch screen is an Iiyama T2252MTS-3.

Desk is out on another job this week, but will try some more testing when it is back on ZOS 7.12 again. 

Thank you for the information. This is not something we came across whilst testing various monitors, however, we haven't got access to that model of monitor. In most cases calibration will either work correctly, or not at all.

If you're able to look into this further when the console is back on ZerOS 7.12, that would be very helpful. Do feel free to send me a direct email with your findings.

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

Hi,

Do the Hue devices use up DMX channels (even though they could never be DMX controlled), or are they extra to the number of DMX channels on a desk? (2048 on a Solution in my case)

A theoretical question as I am unlikely to run out of channels!

I am assuming Hue control works on the Solution, along with all the other ethernet based protocols.

Thanks

Paul

Link to comment
Share on other sites

Hi Paul,

3 minutes ago, Muller Light said:

I am assuming Hue control works on the Solution, along with all the other ethernet based protocols.

Due to hardware limitations, Philips Hue control is not available on Solution consoles. Philips Hue control is only available on FLX, FLX S, and ZerOS Server.

4 minutes ago, Muller Light said:

Do the Hue devices use up DMX channels (even though they could never be DMX controlled), or are they extra to the number of DMX channels on a desk? (2048 on a Solution in my case)

Hue devices have parameters just like DMX fixtures, and so do use licenced ZerOS control channels.

If you have any questions, please let us know.

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

3 hours ago, Edward Z88 said:

Due to hardware limitations, Philips Hue control is not available on Solution consoles. Philips Hue control is only available on FLX, FLX S, and ZerOS Server.

Oh, that is disappointing. I was going to buy some Hues and a bridge for 'practical lights' for a play.

What about the other ethernet protocols added in 7.12?

Thanks

Paul

 

Link to comment
Share on other sites

Hi Paul,

41 minutes ago, Muller Light said:

What about the other ethernet protocols added in 7.12?

Yes - KiNET and Vision.Net protocols are available in ZerOS 7.12 on all hardware, including Solution.

Due to the way the Philips Hue API works on different hardware, we couldn't bring this over to x86 hardware (Solutions & Orbs)

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

14 hours ago, Edward Z88 said:

Philips Hue API

Hi Edward,

A little googling shows me that the Hue API is in the public domain (Why Develop for Hue - Philips Hue Developer Program (meethue.com), which is good, so I guess I will try to find something that will convert, say, sACN to Hue if I ever want to run some Hue lights.  It could run on another interface box e.g. PC, R Pi, Android tablet, etc.

Thanks

Paul

Link to comment
Share on other sites

Hi Paul,

1 hour ago, Muller Light said:

I guess I will try to find something that will convert, say, sACN to Hue if I ever want to run some Hue lights.  It could run on another interface box e.g. PC, R Pi, Android tablet, etc.

Yes - there are several Art-Net to Philips Hue software interfaces designed to run on a PC on the same network. I've not come across any sACN to Philips Hue interfaces, but I'm sure someone's written one!

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

  • 2 weeks later...
On 7/11/2022 at 4:38 PM, scottydog75 said:

Hi Jon,

Tried ZerOS 7.12 on an event this weekend (full size FLX), had the most peculiar issue where I had a 'dead' touchscreen zone on my external montior. I tried recalibrating several times to no joy. I ended up downgrading to ZOS 7.11 which then worked OK. Dead zone confirmed by using the 'draw' function after calibrating the screen; it was a diagonal zone extending from the bottom right corner.

Touch screen is an Iiyama T2252MTS-3.

Desk is out on another job this week, but will try some more testing when it is back on ZOS 7.12 again. 

I also thought the desk was maybe a bit more 'hang-y' when changing between setup and attribute pages than previously. 

Cheers,

Alex

Hi Alex, Jon & Edward,

Prompted by this thread, I tried 7.12 on FLX with my T2252MTS. I too am getting the same 'Dead Zone'. However, it's also doing the same on 7.11.  Never noticed this before as I've never drawn over the screen that extensively when calibrating! 

Also, prompted by the 'hang-y' comment, I have noticed that when scrolling through show files in the Load screen 7.12 is more 'jerky' than 7.11.  I'll send a couple of videos to you via email that show this.

Cheers,

John

First pic is 7.12, second is 7.11

7-12 cal.JPG

7-11 cal.JPG

Link to comment
Share on other sites

Hi John,

15 hours ago, pcollins666 said:

Prompted by this thread, I tried 7.12 on FLX with my T2252MTS. I too am getting the same 'Dead Zone'. However, it's also doing the same on 7.11.  Never noticed this before as I've never drawn over the screen that extensively when calibrating! 

Thanks very much for sharing pictures of this. As you haven't noticed this before, I assume this hasn't affected normal operation? 

If you are able to connect the touchscreen to a PC running Windows 10 (or 11), do you also experience this diagonal "dead zone"?

15 hours ago, pcollins666 said:

Also, prompted by the 'hang-y' comment, I have noticed that when scrolling through show files in the Load screen 7.12 is more 'jerky' than 7.11.  I'll send a couple of videos to you via email that show this.

Thanks again for emailing through your videos. As per my reply to your email, this is logged on our system as reference number ZOS-11014.

Many thanks,

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

On 7/25/2022 at 9:44 AM, Edward Z88 said:

As you haven't noticed this before, I assume this hasn't affected normal operation? 

Correct, no unresponsive finger taps  noted as yet.

On 7/25/2022 at 9:44 AM, Edward Z88 said:

If you are able to connect the touchscreen to a PC running Windows 10 (or 11), do you also experience this diagonal "dead zone"?

I’ll give this a go and get back to you.

Cheers,

John

  • Thanks 1
Link to comment
Share on other sites

Since it's a rather quiet time around here i thought I'd update our FLX with the latetst ZerOS version, but now all my fixtures seem to have become 'Non-library fixtures'. 

I skipped ZerOS 7.11, I hope that didn't 'break' anything? Was there a library change that i wasn't aware of? 

Link to comment
Share on other sites

1 hour ago, Gerran said:

Since it's a rather quiet time around here i thought I'd update our FLX with the latetst ZerOS version, but now all my fixtures seem to have become 'Non-library fixtures'. 

I skipped ZerOS 7.11, I hope that didn't 'break' anything? Was there a library change that i wasn't aware of? 

I think that happened with 7.11 due to the underlying library format change to support multi-cell fixtures.

I'm in a similar place with mine and went through an exercise of trying to find the "updated" library fixtures for the many fixtures I have. I didn't find it a particularly quick process, in part because of the manufacturer versus brand partitioning. I think the desk could be much more helpful here in finding the equivalent and supporting a better search.

I did question and document my experience on this forum, I'm not just complaining now, and it seemed in accordance with what the software does, but I don't think the situation is particularly good. Some enhancements were filed or promoted as a result of feedback, so it's worth you also having a play and noting your thoughts as Z88 are generally very receptive to user comments.

(The linked thread is in the Beta Test forum, some users might not be able to access it).

 

Link to comment
Share on other sites

Hi @Gerran & @kgallen

To add to this, ZerOS 7.13 will include more improvements to the Change Fixtures procedure. 

(This was logged as reference number ZOS-10950 on our system, and has already been implemented in an internal beta version).

Please see the link below for more information on updgrading the fixtures in your show file to the latest library fixtures...

https://zero88.com/manuals/zeros/patching/fixture-schedule/change-fixture

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

Hi Gerran,

3 minutes ago, Gerran said:

Am I supposed to manually find and replace the 'broken' fixtures with existing library entries? 

You don't have to upgrade your fixtures if you don't want to. Your cues will continue to use these fixtures without any issues.

However, if you would like to use the latest versions of the fixtures from the ZerOS Library, they can be upgraded to the newer versions. See the link below for more information...

https://zero88.com/manuals/zeros/patching/fixture-schedule/change-fixture

Hope this helps,

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

42 minutes ago, Edward Z88 said:

You don't have to upgrade your fixtures if you don't want to. Your cues will continue to use these fixtures without any issues.

Hi Edward, thanks! - But there are some "limitations" with staying with the "red" fixtures though aren't there - like not being able to do fixture swap-out/morphing?

Of course any fixtures designed by the user using the Fixture Tools will always be "red" and carry these limitations.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.