Jump to content
Vari-Lite Controls Support Forum

Recommended Posts

Posted

Zero 88 are pleased to announce the launch of ZerOS version 7.9.7 software - a new software release for FLX, FLX S, ZerOS Server, ORB Series, Solution Series, SCD Server (& Pro) and Leapfrog 48 & 96 lighting consoles.

The download, along with more information, can be found at zero88.com/zeros

If you have any questions, please don't hesitate to contact us at the office. Our contact details are:

email: support@zero88.com
phone: 01633 838088

Best Regards,

Posted
  On 12/17/2019 at 6:17 PM, Afx said:

Is this with the new type of library? "OS-9734 ZerOS Library 39 now included"- Doesnt state this. 

Expand  

This is the usual Zero 88 Library. V39 now contains over 11,000 fixtures. 

If you have any questions let us know. 

Edward

Edward Smith
Formerly: Zero 88 Product Specialist - Email Support
Currently: Obsidian Control Systems Product Specialist

  • 3 weeks later...
Posted

Hello

 

I m still on 7.9.5...

Can I go directly to the new 7.9.7 ? 

Thank for your answers and happy new year !

 

Eric (France )

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 4 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 4 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W   // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w  // 7 LY 400 - BSW CMY LED 400w

Posted

Hi Eric,

  On 1/4/2020 at 1:05 AM, van den abbeele Eric said:

m still on 7.9.5...

Can I go directly to the new 7.9.7 ? 

Thank for your answers and happy new year !

Expand  

Happy New Year to you too. 

Yes as Kevin says, you can upgrade to 7.9.7 from 7.9.5.

ZerOS software versions are completely independent from one another, so you can upgrade/downgrade to and from any version. 

Edward

Edward Smith
Formerly: Zero 88 Product Specialist - Email Support
Currently: Obsidian Control Systems Product Specialist

Posted

Hello Kevin,

 

you speak about coprocessor update... Is it including the 7.9.7 update ? Or must I download something more ?

 

thank for your help

 

 

Eric VDA

 

 

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 4 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 4 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W   // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w  // 7 LY 400 - BSW CMY LED 400w

Posted
  Quote

you speak about coprocessor update... Is it including the 7.9.7 update ? Or must I download something more ?

Expand  

That is included in the update file.

I use: Zero 88 FLX S48 / ETC ColorSource 40 / GLP Creation 4096 / Chamsys MQ70 / Madrix

Posted
  Quote

I see this has a library included,  is this a new one with support for multicellular fixtures? (crosses fingers)

Expand  

No, it doesn't. They are working on a new fixture library that will support that in the future. Since i have no longer time to wait for this feature i bought a chamsys mini pc wing and wait  now for the MQ70 to be delivered. I have some Astera FP1 Pixeltubes that have 16 pixel each. And it can't be handelt on my FLX S48. I like the FLX. Some things are nice and easy. But it's a pain that it's not possibel to control some multi fixture lamps out of the box. I have only a smal astera LED Setup for weddings with some AX3, 6 x AX5 and up to 6 FP1 tubes. And that should be possible wit a smal light desk. I also have some involight blinder bars with 10 warm white LEDs (LEDBAR FX103) and RGB backround control. When i patch 8 of these Bars my FLX S48 is full 😞 The infinity chimp lightning desk hat a same problem. They have now changed there fixture limit to unlimited, since they have there multi head fixture library not ready.

I use: Zero 88 FLX S48 / ETC ColorSource 40 / GLP Creation 4096 / Chamsys MQ70 / Madrix

Posted

Thank a lot Erics for your answers

I will do it this week and see the différents améliorations. For the future performance, I need stability for giving to the différents choreographer tranquility for their creation...

 

take care

 

Eric

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 4 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 4 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W   // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w  // 7 LY 400 - BSW CMY LED 400w

  • 3 weeks later...
Posted

Hello,

  On 1/21/2020 at 6:03 PM, pierotec said:

you can downgrade to 7.9.4.3 ?

Expand  

You can roll back the software on ZerOS consoles if you wish. ZerOS 7.9.4.3 is not currently on our website, however ZerOS 7.9.5 is...

https://zero88.com/zeros#legacy
 

Out of interest, why do you wish to downgrade?

 Edward

Edward Smith
Formerly: Zero 88 Product Specialist - Email Support
Currently: Obsidian Control Systems Product Specialist

Posted
  On 1/21/2020 at 10:46 PM, pierotec said:

if I were to have problems, I could go back to a system that I have tested

Expand  

No problem, as you can see on the Legacy area on the ZerOS page there are versions still available from the past few years if you do wish to roll back.

If you have any questions let us know.

Edward

Edward Smith
Formerly: Zero 88 Product Specialist - Email Support
Currently: Obsidian Control Systems Product Specialist

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.