Jump to content
Vari-Lite Controls Support Forum

External monitor


Joshdd

Recommended Posts

Hi Josh,

9 hours ago, Joshdd said:

I was wondering can I use a laptop with a touch screen as an external monitor and how would I connect it to the board would it be with a hdmi to dvi cable or through and router and I It works with the cable do i need a USB cable as well 

Yes you certainly can connect a touch screen laptop to FLX S. You’ll be able to connect the console and your laptop with a single Ethernet cable, and then run the ZerOS Remote Monitor software on your laptop.

Information on how to connect your laptop to give you an external screen can be found here...

http://support.zero88.com/999689141

If you have any queries with this just let me know. 

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

  • 1 year later...
  • 10 months later...

Hi Lloyd,

Welcome to the Zero 88 Forum.

14 hours ago, lightninglloyd said:

ive downloaded the latest software for windows and the desk but just get a connection error

Please see the link below, containing information on using the Windows Remote application with FLX S24...

https://zero88.com/manuals/zeros/networking/using-the-remote-apps

If you wish to connect a laptop running ZerOS Monitor to the FLX S24, you will be able to use a single Ethernet cable between the two. Using this method, you will need to configure static IP addresses in range of one another, for both the FLX S24 and laptop running ZerOS Monitor. For more information on IP addressing, see the link below...

https://zero88.com/manuals/zeros/networking/ip-addressing

If you have any questions please let me know.

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

  • 5 months later...
On 1/18/2019 at 8:46 AM, Edward Z88 said:

Information on how to connect your laptop to give you an external screen can be found here...

http://support.zero88.com/999689141

Morning all.  Looking to use another external monitor (perhaps using a laptop) with my desk (FLX). Unfortunately the link is now dead......  Is anyone aware of a new/updated one please.....?? 

Link to comment
Share on other sites

42 minutes ago, Uriahdemon said:

Morning all.  Looking to use another external monitor (perhaps using a laptop) with my desk (FLX). Unfortunately the link is now dead......  Is anyone aware of a new/updated one please.....?? 

This is a very good point Mac...

Edward, how to we get access to the ex-KB articles and other collateral that's been created over the years? How do we fix these legacy forum links that are all now 404?

I didn't try very hard (like a "typical" user/customer) (*) but I took a wander from the zero88 home page into the support section, to see if finding these articles is obvious. It would seem not. Yes, the new website is very flashy and FLX shouts at you, but as "predicted" when we previewed the new site, the simple substance and access to the key user information has been lost.

How do we fix this?

Kevin

* Actually I tried a bit harder now and I still don't find this info, I'm just going round in circles on the website... I can find user manuals now - although not down the support rabbit-hole -  but what about the KB stuff?

Link to comment
Share on other sites

@kgallenJust had a quick womble myself and it looks like the "micro site" used for the knowledgebase has been deleted from the sub domain support.zero88.com - the domain can be accessed but it's blank.

It's very likely therefore (assuming no one did a FB & didn't take regular backups) that restoring a backup should fix the issue in the interim.

Ian Knight aka The Service Guy - www.serviceguy.co.uk

Link to comment
Share on other sites

1 hour ago, Uriahdemon said:

Morning all.  Looking to use another external monitor (perhaps using a laptop) with my desk (FLX). Unfortunately the link is now dead......  Is anyone aware of a new/updated one please.....?? 

In the meantime - the Wayback Machine comes to the rescue!

Wayback Web Archive

Ian Knight aka The Service Guy - www.serviceguy.co.uk

Link to comment
Share on other sites

Hi Mac,

1 hour ago, Uriahdemon said:

Morning all.  Looking to use another external monitor (perhaps using a laptop) with my desk (FLX). Unfortunately the link is now dead......  Is anyone aware of a new/updated one please.....?? 

For information on configuring the Remote connection on FLX, please see the link below...

https://zero88.com/manuals/zeros/setup/devices/remote-apps

For information on using the Remote Apps with FLX, please see the link below...

https://zero88.com/manuals/zeros/networking/using-the-remote-apps

For information on configuring your PC's IP address, please see the link below...

https://zero88.com/manuals/zeros/networking/windows-ip-configuration

I hope this helps, please let me know how you get on.

35 minutes ago, kgallen said:

Edward, how to we get access to the ex-KB articles and other collateral that's been created over the years?

All information from the knowledge base articles, now fit into the relevant section of the ZerOS Online Manual...

https://zero88.com/manuals/zeros

18 minutes ago, iank99 said:

Just had a quick womble myself and it looks like the "micro site" used for the knowledgebase has been deleted from the sub domain support.zero88.com - the domain can be accessed but it's blank.

The support.zero88.com has now been retired.

If you have any questions let me know.

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

1 minute ago, Edward Z88 said:

 

All information from the knowledge base articles, now fit into the relevant section of the ZerOS Online Manual...

https://zero88.com/manuals/zeros

The support.zero88.com has now been retired.

 

@Edward Z88I can see how that works for FLX & ZerOS but where do the older articles referring to "legacy" products now reside? I've just had a quick look at the manuals page and can't see any links to Frog/Fat Frog (for example) and there are many still in use & being traded second hand - but often the manuals have been lost/discarded.

That was the beauty of the old knowledgebase - it acted as a repository for such information i.e changing your Jester Battery, Alcora Mk 2 manuals. The kit is still out there being used & traded because it's so darn sturdy (as we all know) - it would be nice to show some "love" by letting folks getting the info they need to use it? :D

Ian Knight aka The Service Guy - www.serviceguy.co.uk

Link to comment
Share on other sites

Hi Ian,

42 minutes ago, iank99 said:

@Edward Z88I can see how that works for FLX & ZerOS but where do the older articles referring to "legacy" products now reside? I've just had a quick look at the manuals page and can't see any links to Frog/Fat Frog (for example) and there are many still in use & being traded second hand - but often the manuals have been lost/discarded.

That was the beauty of the old knowledgebase - it acted as a repository for such information i.e changing your Jester Battery, Alcora Mk 2 manuals. The kit is still out there being used & traded because it's so darn sturdy (as we all know) - it would be nice to show some "love" by letting folks getting the info they need to use it? :D

You'll be pleased to hear no information has been lost. All non-ZerOS information, is now available as a download to each legacy product page...

If you have any questions let me know.

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

Thanks for that - on a side note - the Alcora picture on that page isn't the correct picture...

The timer knobs were dark grey to match the fader caps - the knobs on the one in the picture are from a Sirius... But then we're all "guilty" - I've just noticed that the image I use on my website has a Sirius fader cap & Frog timer caps :P

 

Alcora.jpg

Ian Knight aka The Service Guy - www.serviceguy.co.uk

Link to comment
Share on other sites

Hey... I want an Alcora Mk1 picture!

With analogue output kit fitted 😛

...my first own-purchase Zero88 product. The first time we ever got a bonus from work and I blew the lot on an Alcora Mk1 with analogue kit. Bought (new) from @iank99 at CTS in July 2000 😀. The Alcora had only been out a couple of months (so forgive me if it was 1999 not 2000, but I think it was 2000). I still have the CTS receipt on yellow carbon-copy fan-fold paper 🤩.

I bet @iank99 has some stories there!

Link to comment
Share on other sites

2 minutes ago, kgallen said:

Hey... I want an Alcora Mk1 picture!

With analogue output kit fitted 😛

...my first own-purchase Zero88 product. The first time we ever got a bonus from work and I blew the lot on an Alcora Mk1 with analogue kit. Bought (new) from @iank99 at CTS in July 2000 😀. The Alcora had only been out a couple of months (so forgive me if it was 1999 not 2000, but I think it was 2000). I still have the CTS receipt on yellow carbon-copy fan-fold paper 🤩.

I bet @iank99 has some stories there!

Oddly - there are more pictures around of "complete" Mk 1's than the Mk 2... I have a couple of analogue output boards too if you know someone wants one :P

And stories... owh yes - dozens - nearly all of them un-shareable in the public domain.

Ian Knight aka The Service Guy - www.serviceguy.co.uk

Link to comment
Share on other sites

37 minutes ago, iank99 said:

Thanks for that - on a side note - the Alcora picture on that page isn't the correct picture...

The timer knobs were dark grey to match the fader caps - the knobs on the one in the picture are from a Sirius

Good spot!!

26 minutes ago, kgallen said:

Hey... I want an Alcora Mk1 picture!

There you go...

https://zero88.com/control/alcora

Time pot caps are correct, and it keeps @kgallen happy - win win!!

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

3 hours ago, iank99 said:

It's very likely therefore (assuming no one did a FB & didn't take regular backups) that restoring a backup should fix the issue in the interim.

Let's not do that... we had so many complaints about the old knowledgebase... the search would ignore any words of three characters or less, so no results for "FLX" "FLX S" FLX S24" or "ORB"! If an article related to multiple products, it would pick one "randomly" to show in the breadcrumb list which created much confusion - you click FLX > Spare Fader and the breadcumb list would show ORB > Spare Fader 🤦‍♂️

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

23 minutes ago, Jon Hole said:

Let's not do that... we had so many complaints about the old knowledgebase... the search would ignore any words of three characters or less, so no results for "FLX" "FLX S" FLX S24" or "ORB"! If an article related to multiple products, it would pick one "randomly" to show in the breadcrumb list which created much confusion - you click FLX > Spare Fader and the breadcumb list would show ORB > Spare Fader 🤦‍♂️

Agreed the old KB was awful to use. But the content was gold (when you could find it).

 

Jon's full time job the last couple of weeks - calming down the old-guard! 🤣

Link to comment
Share on other sites

7 hours ago, kgallen said:

I can find user manuals now - although not down the support rabbit-hole

I've asked MarCom to add a link to the Manuals page onto the Support page...

6 hours ago, iank99 said:

I've just had a quick look at the manuals page and can't see any links to Frog/Fat Frog (for example)

...and also add a link to the A-Z (for legacy manuals) onto the Manuals page. This should hopefully be live tomorrow.

2 hours ago, kgallen said:

Jon's full time job the last couple of weeks - calming down the old-guard! 🤣

haha, not at all! Keep the feedback coming... (not that I need to say that 😉)

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

8 hours ago, DALX said:

Thank you for providing links to legacy equipment

No problem - we're proud of our history and have no plans to remove all the great content. There are some gems, especially the "Eclipse" console manual!...

https://zero88.com/storage/downloads/cdaf1417-1dac-4a61-a588-71e98cfb3444/Eclipse-Operating-Manual.pdf

https://zero88.com/control/eclipse

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.