[Macros gone for lamp on LAMP ON Leap Frog 48]

On 2/11/2022 at 9:35 AM, Edward Z88 said:

Hi @glitcher0

If you wish to control multicell fixtures with your Leapfrog console, I'd recommend installing ZerOS 7.10, available from the link below...

https://zero88.com/storage/downloads/0b68ecc6-9829-4000-b469-63b94a0c62c3/ZerOS-7.10.exe

If you do not wish to control multicell fixtures, ZerOS 7.9.9.5 software can be downloaded from the link below...

https://zero88.com/storage/downloads/607844fa-0fdf-401a-9e42-29c8fac4e7bf/ZerOS-7.9.9.5.zip

Installation instructions are available here...

https://zero88.com/manuals/zeros/setup/load/zeros-software

Hope this helps,

Edward

Hi, Its been a longtime but I am now getting around to updating the desk. I see 7.12 is out now, will that work on my desk?

 

[Macros gone for lamp on LAMP ON Leap Frog 48]

Hi @Edward Z88

Can you explain what multicell is please?

Thanks

[Macros gone for lamp on LAMP ON Leap Frog 48]

Just one more question @Edward Z88

Where can I get the latest version of OS for the leapfrog 48?

Thanks!

[Macros gone for lamp on LAMP ON Leap Frog 48]

Thank you @Edward Z88

All I had to do was shift macros as it was not on the board but on the screen, thank you!

[Macros gone for lamp on LAMP ON Leap Frog 48]

Hi @Edward Z88

on the macro tab on the board we have no macro options for any of our lights as well as not having the button to create macros, it is completely blank

[Macros gone for lamp on LAMP ON Leap Frog 48]

Hi,

I am having some problems with my leapfrog 48 where about 2/3 months ago we had in the macros panel when we selected a vari-lite 2500 Wash there would be a option to lamp on and lamp off but about 2 months ago those 2 options disappeared and now I have to go into beamshape and do it manually but that is quite an inconvenience. In the macro tab now I don't even have the option to generate new macros, the screen on the board is blank. What can I do to bring them back? 

[Using Phantom OS Frog 48 and Wysiwyg.]

Ok thank you for your help!

 

[Using Phantom OS Frog 48 and Wysiwyg.]

Hello

from what I can see the dongle costs £1000. Would any dongle work? For example HUAWEI E3372, LTE/4G 150 Mbps USB Dongle, Low Cost Travel, Unlocked, with FREE SMARTY SIM Card- White https://smile.amazon.co.uk/dp/B0949HXQ5M/ref=cm_sw_r_cp_api_glt_fabc_V9J375XQV1WM2PR34HPM?psc=1

And Ethernet defies the reason why I want to use this. Code at home and then upload onto board and then do some corrections.

Thanks

[Using Phantom OS Frog 48 and Wysiwyg.]

Also on the SACN when I press connect it connects even when I do not have phantom OS running.

[Using Phantom OS Frog 48 and Wysiwyg.]

Hi! @Edward Z88
This has help and has allowed be to connect to the 48 but now I have now ran into another problem where in live mode I am unable to use the lights with Phantom ZerOS.

[Using Phantom OS Frog 48 and Wysiwyg.]

Hi!
Can anyone help me set up and connect my WYSIWYG to Phantom Os? I have WYSIWYG 26 and I am trying to connect it to WYSIWYG so I can do some programming when not at the desk but every time I try to connect the visualiser Could not connect to the following consoles. sACN.