Commands | Zero 88
Select your language
Intensity

Commands

To control the intensity of a fixture(s) via the numeric keypad, commands must be typed like this:

Channel Number (s) @ Intensity % Enter


Examples

Examples of valid commands are below:


1 @ 1 0 0 Enter

1, @ 100,

This sets the intensity of channel 1 to 100%.


2 And 3 @ 7 5 Enter

2, And 3, @ 75,

This sets the intensity of channels 2 and 3 to 75%.


5 Thru 1 0 @ 5 0 Enter

5 Thru 10, @ 50,

This sets the intensity of channels 5 through to 10 to 50%.


5 Thru 1 0 Except 7 @ 6 5 Enter

5 Thru 10, Except 7, @ 65,

This sets the intensity of channels 5, 6, 8, 9 and 10 to 65%.


3 Thru 9 Except 5 Except 6 @ 0 Enter

3 Thru 9, Except 5, Except 6, @ 0,

This sets the intensity of channels 3, 4, 7, 8 and 9 to 0%. Note how Except is used twice to exclude two different channels from the range.


1 Thru 3 And 7 Thru 9 @ 2 5 Enter

1 Thru 3, And 7 Thru 9, @ 25,

This sets the intensity of channels 1, 2, 3, 7, 8, and 9 to 25%.


1 And 7 Thru 1 2 Except 9 @ 5 Enter

1, And 7 Thru 12, Except 9, @ 5,

This sets the intensity of channels 1, 7, 8, 10, 11 and 12 to 5%.


Shortcuts

There are also some shortcuts available:

1, @ @,

@@ is a shortcut which quickly sets the intensity to 100%.


1, @ .,

@. (at dot) is a shortcut which quickly sets the intensity to 0%.


Enter Enter, @ .,

Enter Enter is a shortcut which quickly selects all the channels that are currently on (above 0%). In this example, it then takes them to 0% using the @. shortcut (resulting in a blackout).