Cue fader down values

[Jouper]

How can i set the values when my cue fader is for example at 0. So for example i want my cue level from 0 to 100 to have the intensity of my fixture be 30 to 90

[Edward Z88]

Hi @Jouper

  On 5/11/2023 at 12:11 PM, Jouper said:

So for example i want my cue level from 0 to 100 to have the intensity of my fixture be 30 to 90

Expand  

If when you lower a playback fader, you want your fixtures to stay on @ 30%, you could program another playback with your fixtures recorded @ 30%. Then, you can raise this playback fader to full, and leave it. With this playback up, the lowest value that these fixtures can then be taken to by your cues is 30%.

I hope this achieves what you're after.

[kgallen]

Then a Topset for the 90%? Depends on the console...

[Jouper]

  On 5/11/2023 at 2:33 PM, Edward Z88 said:

Hi @Jouper

If when you lower a playback fader, you want your fixtures to stay on @ 30%, you could program another playback with your fixtures recorded @ 30%. Then, you can raise this playback fader to full, and leave it. With this playback up, the lowest value that these fixtures can then be taken to by your cues is 30%.

I hope this achieves what you're after.

Expand  

OK, so there is no other way like setting a playback specific default value, right?

[Edward Z88]

  On 5/11/2023 at 5:40 PM, Jouper said:

OK, so there is no other way like setting a playback specific default value, right?

Expand  

There is no way of setting a playback "minimum" level. The playback fader will take the intensity level of the current cue down to 0%.