Techie_v2 Posted February 5, 2023 Report Share Posted February 5, 2023 So today I was a muppet and left 2 playbacks that control the fog and fan on our haze machine on while programming 2/3 of a show. First I thought I'd just go back to the start, lower the playbacks, record tracking forwards and that would sort it, but then I remembered I had altered the playbacks throughout the show. So what I have done is unpatched it then repatched, I then ran through some cues and it seems to have gone. Would this have worked? Quote Link to comment Share on other sites More sharing options...
Jon Hole Posted February 5, 2023 Report Share Posted February 5, 2023 If you mean deleted the fixture, and then repatched it, then yes - that would work. If you simply removed the DMX address from it, and then added a DMX address again, no - the data would still be intact. Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
Techie_v2 Posted February 6, 2023 Author Report Share Posted February 6, 2023 Yeah I went into setup, deleted the fixture that added it again albeit on the same address, firstly to see if that would work, I was going to add it back on a different address but adding it back on the same address seemed to work. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.