FLX S24 RDM Status Reports

[Commo]

Moin,

Please forgive me, my English is not the best, I am not a native speaker :).

We recently bought a FLX S24 and 2 new LSC RED3 dimmer packs at the school where I work. Both the FLX and the dimmers support RDM. Using the RigSync function, I have already managed to automatically register the dimmers in the console and patch them. The specifications of the dimmers state that they can report temperature, available phases and fan speed back to the console via RDM. However, I have not yet found the function in the FLX, nor did the instructions help me to query the RDM status of the dimmers. Is this function available in the FLX S? If so, where can I find it? If not, is it possible to add this with a software update? At the moment, firmware 7.9.8 is running on the console.  Do the dimmers need to be patched with a special fixture profile for this? If yes, does the RigSync RDM do this automatically?

Thank you in Advice

Regards

 

Lukas

[Edward Z88]

Hi Lukas,

Welcome to the Zero 88 Forum.

58 minutes ago, Commo said:

The specifications of the dimmers state that they can report temperature, available phases and fan speed back to the console via RDM. However, I have not yet found the function in the FLX, nor did the instructions help me to query the RDM status of the dimmers. Is this function available in the FLX S? If so, where can I find it? If not, is it possible to add this with a software update? At the moment, firmware 7.9.8 is running on the console.  Do the dimmers need to be patched with a special fixture profile for this? If yes, does the RigSync RDM do this automatically?

FLX S consoles feature our RigSync software, which uses RDM for automatic patching and synchronisation. Currently FLX S consoles do not display RDM status information of connected devices. This is something we would like to implement in a future ZerOS software update.

If you have any questions, please let us know.

Edward