Jump to content
Vari-Lite Controls Support Forum

Betapack L1 has no output power


Jac

Recommended Posts

Hi All,

I have a problem with my betapack3. I have searched online but can't find the solution. My pack has a 3phase 32A CEE connector. When I check all internal soldering etc I get the correct measurements. But no output on L1 what could be the cause?

Thanks in advance.

Link to comment
Share on other sites

I understand the transformer failing is a typical cause. This doesn't mean this is the case for you of course, but it would be the first place I'd look if I had the lid off.

Your main men for this are either:

@KWR88 Keith at Zero88

Keith Rogers
Technical Support Representative
Global, Zero 88
keith.rogers@signify.com
+44 1633 833101

or

@iank99 In Coventry.

Both of whom will probably be along to this thread shortly with wiser words than mine...

Link to comment
Share on other sites

16 hours ago, kgallen said:

I understand the transformer failing is a typical cause. This doesn't mean this is the case for you of course, but it would be the first place I'd look if I had the lid off.

 

It depends on the age of your Beta 3 - some of the first production batches did have issues with transformers failing, if you can post the serial number of the unit here - that will help identify it's age.

I also have a couple of Beta 3's on my bench waiting repair where the opto isolator & it's output stage appear to have been damaged by flash testing - the unit powers up but there's no output from pairs of channels.

Your profile doesn't show where you are but it might well be that your dimmer will need to be taken to your local Zero Service agent.

Ian Knight aka The Service Guy - www.serviceguy.co.uk

Link to comment
Share on other sites

Hi Jac,

The s/n is on the rear of the unit and can be quite long, if you want to send that to me on the address in my sign off i can date the dimmer for you.

As mentioned the transformer is one possible cause but there are other parts that can give the same symptoms if they fail as well.

As you are already familiar with Controllux  would recommend them as you first point of contact to have the unit assessed.

  • Like 1

Regards,

Keith Rogers

Zero 88 Support: support@zero88.com

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.