Using other playbacks while running Cue Stack 0

[DRP]

I'm sure this must be very basic, but just want to check.  If I set up single state playbacks on a number (say 4) of faders, and then run the main cue stack on the master playback, can I 'busk' with the 4 other playbacks without affecting the current or subsequent cues on the MPB?

[kgallen]

Yup.

on your other playbacks you’ll need to decide if you want ‘Release on lower’ or not. Probably you do.

setup+playback button 

There are other details like only record in your other playbacks stuff you deliberately want to control because C/B/S/P will be LTP and intensity probably HTP. For most purposes this will mean having tracking enabled and probably SmartTag - probably avoiding Snapshot!