Uriahdemon Posted November 30, 2020 Report Share Posted November 30, 2020 Good afternoon all. I have spent a bit of time with Swan Flight (who have been fantastic) designing and building a case for my FLX rig and thought you may appreciate a pic or two. I did this as it saves carrying several different cases around and it also helps with setting up and breaking down time. It caters for the FLX, 2 X Wings, Laptop (Running PhantomOS as a tracking back up), Touchscreen, Ethernet to DMX Gateway, DMX Splitter and a MIDI trigger. Of course there will be situations where I cannot place the case where needed so will use a separate touchscreen, Wing and Laptop via a small Ethernet to DMX Gateway but again that is all in the case. I thought you may appreciate a couple of pix. PS.... I am lucky enough to have a transit to cart this around. Link to more Pix: https://www.dropbox.com/sh/3etf147033chkrt/AADzDoSaUxr8vgbvn3EVOs28a?dl=0 Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted November 30, 2020 Report Share Posted November 30, 2020 Hi Mac, Thanks very much for sharing the pictures. That looks fantastic, very nice setup. Looks like a really effective way to make your life easier speeding up the setting up time, and ultimately, keep it all safe! Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Uriahdemon Posted November 30, 2020 Author Report Share Posted November 30, 2020 Thanks Ed, from arrival time to setting it all up is 5 mins so all good on that side of things. On the other at least I have some redundancy ... just in case !! Quote Link to comment Share on other sites More sharing options...
Davidmk Posted December 1, 2020 Report Share Posted December 1, 2020 That's brilliant. I'd look at doing something similar except I regularly have to carry my desk up a spiral staircase so I have to keep it down to something I can lift with one hand. Quote Link to comment Share on other sites More sharing options...
Uriahdemon Posted December 1, 2020 Author Report Share Posted December 1, 2020 8 hours ago, Davidmk said: That's brilliant. I'd look at doing something similar except I regularly have to carry my desk up a spiral staircase so I have to keep it down to something I can lift with one hand. When it comes to spiral staircases that will be the ‘B’ Rig.... 😌 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.