FLX and Ancillaries Tour Case

[Uriahdemon]

Good afternoon all.

I have spent a bit of time with Swan Flight (who have been fantastic) designing and building a case for my FLX rig and thought you may appreciate a pic or two.

I did this as it saves carrying several different cases around and it also helps with setting up and breaking down time.  It caters for the FLX, 2 X Wings, Laptop (Running PhantomOS as a tracking back up), Touchscreen, Ethernet to DMX Gateway, DMX Splitter and a MIDI trigger.  Of course there will be situations where I cannot place the case where needed so will use a separate touchscreen, Wing and Laptop via a small Ethernet to DMX Gateway but again that is all in the case.

I thought you may appreciate a couple of pix.

PS....  I am lucky enough to have a transit to cart this around.

 

Link to more Pix: https://www.dropbox.com/sh/3etf147033chkrt/AADzDoSaUxr8vgbvn3EVOs28a?dl=0

[Edward Z88]

Hi Mac,

Thanks very much for sharing the pictures. That looks fantastic, very nice setup.

Looks like a really effective way to make your life easier speeding up the setting up time, and ultimately, keep it all safe!

Edward

[Uriahdemon]

Thanks Ed, 

from arrival time to setting it all up is 5 mins so all good on that side of things.

On the other at least I have some redundancy ... just in case  !!

[Davidmk]

That's brilliant. I'd look at doing something similar except I regularly have to carry my desk up a spiral staircase so I have to keep it down to something I can lift with one hand.

[Uriahdemon]

8 hours ago, Davidmk said:

That's brilliant. I'd look at doing something similar except I regularly have to carry my desk up a spiral staircase so I have to keep it down to something I can lift with one hand.

When it comes to spiral staircases that will be the ‘B’ Rig.... 😌