Jump to content
Vari-Lite Controls Support Forum

Jester 24/48 USB Problems


Jmax

Recommended Posts

I have a Jester 24/48 at my college that has issues with the USB port. When I try to save a show file to a usb stick it keeps saying working until I cancel the save. It also has issues using a keyboard for labelling cues and subs as it will only work with a specific keyboard as long as the keyboard was plugged in before it got turned on. It is running v3.1 firmware I have tried updating it to 4.1 but it cannot recognise the usb stick. I was just wondering if I was doing something wrong or if there is a issue with the desk.

 

Link to comment
Share on other sites

Hello,

Welcome to the Zero 88 Forum.

33 minutes ago, Jmax said:

It is running v3.1 firmware I have tried updating it to 4.1 but it cannot recognise the usb stick.

JesterOS 4.1 can be downloaded here...

https://zero88.com/storage/downloads/248ce535-0aef-40ac-89a6-88e34e4f2cf1/Jester41.zip

Once downloaded, extract the file to the root of a USB stick, and plug into the Jester. Then boot the Jester with the left and right arrow keys held down.

If the Jester cannot detect the USB stick, turn the Jester off, and remove the USB stick. Then turn the Jester on, and go into Super User (SHIFT + MODE). Then arrow down to <USB Host>. Hold SHIFT and press ENTER, and you should see the option to choose <Upgrade>. Press this, and run the upgrade.

If you have any questions please let us know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

29 minutes ago, Edward- Z88 said:

Hello,

Welcome to the Zero 88 Forum.

JesterOS 4.1 can be downloaded here...

https://zero88.com/storage/downloads/248ce535-0aef-40ac-89a6-88e34e4f2cf1/Jester41.zip

Once downloaded, extract the file to the root of a USB stick, and plug into the Jester. Then boot the Jester with the left and right arrow keys held down.

If the Jester cannot detect the USB stick, turn the Jester off, and remove the USB stick. Then turn the Jester on, and go into Super User (SHIFT + MODE). Then arrow down to <USB Host>. Hold SHIFT and press ENTER, and you should see the option to choose <Upgrade>. Press this, and run the upgrade.

If you have any questions please let us know.

Edward

Thanks for the reply. When I boot it with the arrows held down it goes into the update mode but it keeps saying "Searching for an upgrade file, Please Wait". I left it for 20mins before cancelling it as it didn't seem to find the update file. the usb has a light that was just solid red the entire time if that gives any info.

 

When I go into the usb host mode option it doesn't come up with a upgrade option it just shows some text which I guess is some version info.

 

I have included photos to see if that gives you any help.

Josh

IMG_0287.jpeg

IMG_0288.jpeg

IMG_0289.jpeg

Link to comment
Share on other sites

Hi Josh,

Thanks for the photos.

14 minutes ago, Jmax said:

When I go into the usb host mode option it doesn't come up with a upgrade option it just shows some text which I guess is some version info.

When you chose <USB Host>, did you have Shift held down?

56 minutes ago, Edward- Z88 said:

Then arrow down to <USB Host>. Hold SHIFT and press ENTER, and you should see the option to choose <Upgrade>.

If you have any questions let me know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Hi Edward

6 minutes ago, Edward- Z88 said:

When you chose <USB Host>, did you have Shift held down?

Yes I did have the shift button held down when I pressed enter. I have tried restarting it several times to see if that helps but it made no change.

 

Josh

Link to comment
Share on other sites

Hi Josh,

31 minutes ago, Jmax said:

Yes I did have the shift button held down when I pressed enter. I have tried restarting it several times to see if that helps but it made no change.

Thanks for confirming.

Please email us a picture of the console's serial number to support@zero88.com, displayed at the top of the LCD when you open Super User, and we will be able to advise the next step.

If you are able to, it would also be worth copying the Jester4.1 software onto a different USB stick if you have one to hand, and try booting the console with the left and right arrow keys held down again. 

If you have any questions let me know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

  • 6 months later...

Hi,

 

I have exactly the same problem that Josh, so i have formated my usb stick to try again, it doesn't work. My Jester 24-48 Serial is: 0010900 07080019, running on OS V3.2.

 

The problem is i can't save or load any show from the usb stick. Can you hep me? It's very urgent, because i start a festival next week. Thank's!

Link to comment
Share on other sites

Hi Light.UP,

Which format did you format the USB drive into? Have you tried other USB drives?

Please can you use a different USB stick to perform a software update from V3.2 to V4.1?

Then perform the USB Host update, as described above (remember to press SHIFT!).

Then try loading the showfiles.

Jon

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

Hello, I'm testing now with a 2Go USB stick, in FAT32, it still doesn't work... The USB plug seems to be OK because i use it often for a USB ledlight, so at least the USB power supply works...

 

What can i do anymore? By luck the internal memory is ok, and i have changed the battery inside last year.

Link to comment
Share on other sites

Not much else that we can think of on this other than failure of something in the USB circuit itself.

Only way to tell that is have the desk back or investigation.

PM on the address below to discuss this more.

Regards,

 

Keith Rogers

keith.rogers@signify.com

DD: +44 (0) 1633 833 101.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.