andi Posted May 27, 2004 Report Posted May 27, 2004 the new 9.6 update isn't working well. the problem is that the F (fade) and S(stap) don't function! have you a idea to bring that to work? andi Quote
Haytech Posted May 28, 2004 Report Posted May 28, 2004 Hallo Andi, ich glaube hier ist etwas deutsch von nutzen kannst Du mir Dein problem etwas genauer beschreiben ? Hi Andi, it´s posiible to post in german too, please discribe your problem step by step ... K-Nine - please move this post to How Do I ... Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone
ice Posted May 28, 2004 Report Posted May 28, 2004 Note that when using Fade as a modifier, you should have a LTP time set up; otherwise the fade won't work. Where do you use the F/S? Memories; chase? I've used it quite a bit in V9.6 and didn't notice anything strange I guess. Quote > 500 posts, time for a new T-shirt?
K-Nine Posted May 28, 2004 Report Posted May 28, 2004 That's correct - The Snap (S) or Fade (F) columns refer to the action of the Colour ©, beamshape ( and Position (P) fixture parameters which are programmed into the memory, when the memory is triggered. If you want any of them to fade to their programmed values on pressing the GO button, you need to set the LTP fade time to the required value and the attribute (colour, beam, position) to fade. On submasters, the snap or fade for the LTP parameters (colour, beam and position) refers to how the outputs will change once the LTP trigger level has been reached. Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
sam.henderson Posted May 28, 2004 Report Posted May 28, 2004 In one of the earlier updates the Snap/ Fade values were not shown in the columns (due to a bug) but you could still see it on the lcd. Maybe this is your problem Sam Quote Sam for a interactive training suport program on how to use your fat frog effectivly why not look at my frog training program-
Haytech Posted May 28, 2004 Report Posted May 28, 2004 Hi Andi, es gibt da gleich ein paar möglichkeiten, zunächst solltest Du feststellen, ob das Update wirklich gefunzt hat [*] Drücke + und - und Enter [*] DeskInformation wenn die Version wirklich auf 9.6 Upgedatet wurde, kann es daran liegen, dass die LTP Fadezeit auf 00:00:0 Steht Die LTP Fade Zeit ist die Zeit die der Fade egal ob Colour / Beamshape / Position durchläuft. Stelle sie z.B. auf 00:03:0 dann laufen die Daten innerhalb der 3 Sec von Value1 zu Value2 sieht sehr näckisch aus, mit ein Paar Scans LTP steht für latest takes presence - neuster wert wird gesendet das betrifft natürlich nur die Fixtures nicht das Konventionelle Licht. Viel Erfolg ! Vielen Dank Felix Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone
felixgeiger Posted May 28, 2004 Report Posted May 28, 2004 nachtrag zu haytechs beitrag / kleine korrektur ltp steht für latest level takes precedence - der neueste wert wird gesendet. nichts für ungut Quote
K-Nine Posted June 1, 2004 Report Posted June 1, 2004 Apologies, as I don't speak German Haytech and Felix: Have you sorted out the snap.fade problem or is there something that still needs explaining or investigating ? Quote K-Nine : Technically Advanced Roving Dog In Space Bran Media | Myspace
Haytech Posted June 1, 2004 Report Posted June 1, 2004 Hi K-Nine, Andi hasn´t replied yet, I donno if it is a good or a bad sign :wink: We will let you know if there are more problems about fade/snap K Neun entschuldigt das er kein deutsch spricht, und fragt Ob wir das snap/fade problem lösen konnten - Diese frage kann ich nur an Andi weitergeben .... Quote Sebastian H. Pro - Sound Showtechnik The secret to creativity is knowing how to hide your sources. Albert Einstein "You can get a lot more done with a kind word and a gun" Al Capone
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.