Sirius 24 Factory reset

[Bruce]

I have an old Sirius 24 which has a problem,all the red and yellow led's come on on start up and stay o ,none of the LCD's come on at all and the console dosen't respond to any key press.
I am hopping a factory reset will sought out,what I don't know how to do a factory reset

[Edward Z88]

Hi Bruce,

Welcome to the Zero 88 Forum.

Factory Reset on Sirius 24 is called "Clear All". For more information, see page 24 of the manual below...

https://zero88.com/storage/downloads/81245b69-38c9-4e25-a9ab-167df2de756d/Sirius-24_48-Manual-Issue-3.pdf

Hope this helps,

Edward

[Bruce]

Hi Ed

Thanks

I had managed to clear the problem by trial and error by holding don the memory +- while powering up ,or maybe the console sorted its self out I have since done a clear all and every thing seems to be working normally .I cant plug the console in to dimmers at the moment as  due to the lock down I can't get to my studio at the moment to connect any dimmers so experimenting is not showing me the direct results

Its's a long time since I have seen a Sirius let alone use one, for over 20 years,I spend more time setting up nodes and multiple universes these days..

my question is can I place a chase in to a sub master .the Manual says I can place a chase in to a cue stack and I can place a sub in to a chase step but can I place a chase on to a sub?

[Edward Z88]

Hi Bruce,

An effect (chase) cannot be placed directly onto a manual master (submaster). However, an effect in the memory stack can be transferred to a manual master (as per page 22 of the manual).

See page 11 for information on how to transfer a memory to a manual master.

Hope this helps,

Edward