Jump to content
Vari-Lite Controls Support Forum

Capture and FLX / Zeros


O Thompson

Recommended Posts

Hi Olly,

SHIFT + F10 is the keyboard shortcut for the SETUP key. This will work if your active window is the LCD or External Monitor windows. To make them active click in the Windows, or close and reopen the window from the Phantom launcher.

Hope this helps,

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

1 minute ago, Edward- Z88 said:

Hi Olly,

SHIFT + F10 is the keyboard shortcut for the SETUP key. This will work if your active window is the LCD or External Monitor windows. To make them active click in the Windows, or close and reopen the window from the Phantom launcher.

Hope this helps,

Edward

ah ok. In that case, on the FLX sim there is no "visualiser" option. I have already enabled remote apps in devices (is this required) and selected the 127.0.0.1 IP option.

 

Link to comment
Share on other sites

2 minutes ago, O Thompson said:

It may be worth noting that i am using a works PC and i am unable to re allocate the machines IP

 

You won't need to change any IPs if you are controlling Capture from Phantom on the same PC, as you will; simply need the PCs loopback IP of 127.0.0.1.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

2 minutes ago, Edward- Z88 said:

Hi Olly,

SHIFT + F10 is the keyboard shortcut for the SETUP key. This will work if your active window is the LCD or External Monitor windows. To make them active click in the Windows, or close and reopen the window from the Phantom launcher.

Hope this helps,

Edward

I actually had it working quite successfully with the physical console. However in that case it was on an isolated network. We have a separate network setup in the venue for remote control of the FLX and X32 consoles, which allows me more control over the IP allocations.

Link to comment
Share on other sites

Hi Olly,

I have updated the guide as per Phantom ZerOS 7.9.7, as the CITP option is now under Universes rather than Visualisation.

You should find if you start Capture with Phantom's CITP IP of 127.0.0.1 chosen, Capture detects the CITP protocol. Toggling from and then back to the 127.0.0.1 will prompt Capture to detect this IP.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.