Jump to content
Vari-Lite Controls Support Forum

Creating effects


lugamil

Recommended Posts

Hi all,

I recently got my hands on a FLX S48 2U. I installed the latest software update (7.9.7).
I was playing with moving heads and movement effects. Most of these have a standard offset. My question is: can i change the offset. when I enable the effect the offset is to significant for most of my use cases but when I turn the offset encoder there is no offset at all. Is it possible to get something in between?

Thank you in advance

Mil

Link to comment
Share on other sites

Hi Mil,

Welcome to the Zero 88 Forum.

11 hours ago, lugamil said:

Most of these have a standard offset. My question is: can i change the offset.

As you have found, most effects have an auto offset. If you want to quickly change this, you can use the quick offset options along the top of the effects window. If you want to customise the offset, you can use the Offset encoder wheel. If you simply dial the Offset wheel, in the same way when you dial speed you give that speed value to all selected fixtures, you give the displayed offset value to all selected fixtures. As a result, each fixture is not offset from one another.

As Kevin mentions above, if you hold SHIFT and dial the Offset encoder, you fan the offset values across the selected fixtures, in the order of selection. There are 4 fan behaviours to choose from, which can be configured by holding SETUP, and tapping the Effect tab. You can then hold Z/SHIFT, and choose the Fan behaviour you would like when the Shift key is held.

Hope this helps, if you have any questions let us know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.