Jump to content
Vari-Lite Controls Support Forum

Global Tap and crossfade doesn't work together


DangiDanger

Recommended Posts

Hello,

Firstly, welcome to the Zero 88 Forum.

1 hour ago, DangiDanger said:

I would like to use a chase with crossfade and use the Global Tap from another playback, but it doesn't

work. I would have to change the chase to "ramp up" or "ramp down".

To configure a chase to crossfade between cues, hold SETUP and tap the chase's button to open the Chase's Settings. Under Intensity, choose "Cross Fade". You can then define a fade percentage, using the Intensity Fade Percentage option below. This defines the percentage of the duration of each step that the fixtures are fading. 100% fade would mean 100% of the duration of each cue the fixtures are fading. Click OK, and now the chase will cross fade between each step of the chase. 

You can the use a Global BPM fader to control the speed of the chase.

For more information on Global BPM, see below...

http://support.zero88.com/1011580981

Hope this helps, if you have any questions let us know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Hello Edward,

 

No, I mean something easier (?)

 

I'm trying the following:

Take a group of PARs, use the effects section, set for example a smooth effect with individual offset, record it on

a playback, turn it into chase within this playback, use global bpm. It's set to crossfade by default. Global tap is setup like in your description.

With crossfade setup no triggering by global tap. If I switch to ramp up or ramp down, global tap triggers as it should.

 

Link to comment
Share on other sites

Hello,

Effects can’t be turned into chases. Cue stacks can be turned into chases. As effects are recorded as single cues, effects can be steps of a chase.

To control the speed of an effect, you can use the Speed Override control. To do this hold SETUP and tap an empty playback’s button. From the options choose Speed Override. 

This fader will then control whichever playback you are viewing. So to control the speed of your effect, hold VIEW and tap your effect playback’s button. You can then use the fader to speed up or slow down the effect. 

Hope this helps,

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.