Jump to content
Vari-Lite Controls Support Forum

ZerOS 7.9.6 gets slow


Erics

Recommended Posts

I have just teste the new ZeroOs 7.9.6 on my FLX S48.

I created a new show, patched only two moving heads. I have nothing recorded. I only played with the programmer. After a break of 20 minutes the desk do respond very slow. When i hit clear to deselect everything it takes some seconds to clear the programmer. When i change fader pages you can see the LEDs take some time. It is possible to get both LEDs on... Yeah i have got a thrid Page 😉

I dont't know whats going on. But it seems that the hole desk is busy with something. But there is nothing running. No cue list... no effect...

I use: Zero 88 FLX S48 / ETC ColorSource 40 / GLP Creation 4096 / Chamsys MQ70 / Madrix

Link to comment
Share on other sites

Hi Eric,

Sorry to hear this.

If you tap Z/Shift -> System Information -> System Text, are there any error messages being reported? If so could you take a picture of this screen and email it to me?

I have logged this error report on our system as ZOS-9368 for investigation.

If you have any queries let us know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

I have taken a video from the effekt. This is a screenshot from the video. I have not tried to look up the system information text. After a reboot the FLX works normal. I will try to recrate it. Perhaps i can find some more helpful information.

 

Edited by Jon Hole
PHOTO REMOVED TO PROTECT SERIAL NUMBER

I use: Zero 88 FLX S48 / ETC ColorSource 40 / GLP Creation 4096 / Chamsys MQ70 / Madrix

Link to comment
Share on other sites

18 hours ago, Erics said:

After a reboot the FLX works normal. I will try to recrate it. Perhaps i can find some more helpful information.

 

16 hours ago, Sven76 said:

Strangely after going into Setup and back again everything was responding fine again

Hi both,

Erics - It would be good to know if existing SETUP fixes it for you too.

Both - Would either of you be willing to (and do you have time to) try some software which might fix it for you?

Thanks,

 

(Erics - thanks for the photo. As this included your serial number, I've taken it offline - we got the information we needed from it)

 

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

Hi both,

I've just uploaded a beta software release to our beta forum (which you're both members of) which we believe will fix this issue you've seen.

Is there any chance you have an opportunity to try it?

Thank you,

Jon

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

Hi Jon,

I can test the beta software release. Until now i havn't reproduced the issue. But i only made some simple programmings with the FLX on the weekend. Good to hear that you have found something so fast. I hope to report back until the end of the week.

I use: Zero 88 FLX S48 / ETC ColorSource 40 / GLP Creation 4096 / Chamsys MQ70 / Madrix

Link to comment
Share on other sites

  • 2 weeks later...

Hi Jon,

I have made some test on friday and saturday. But i was unable to reproduce the slow down. So i have not upgraded to the beta. This week i have some more time for testing. I hope i get a workaround ro repeat the error and can see if upgrading will fix it.

I use: Zero 88 FLX S48 / ETC ColorSource 40 / GLP Creation 4096 / Chamsys MQ70 / Madrix

Link to comment
Share on other sites

Hi Erics,

3 hours ago, Erics said:

Hi Jon,

I have made some test on friday and saturday. But i was unable to reproduce the slow down. So i have not upgraded to the beta. This week i have some more time for testing. I hope i get a workaround ro repeat the error and can see if upgrading will fix it.

Thanks very much for trying this, glad to hear the slow down isn't causing an issue now.

If you have any questions let me know.

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.