Carpo Posted September 13, 2019 Report Posted September 13, 2019 Have tried to store different shows in the the internal FLX S 24 memory - but can not get it working. Is it possible, and am I just doing something wrong? Or do I really have to use a memory stick? I would really prefer to have the different shows on the internal memory, and just use a USB stick for backup. Quote Carsten Poulsen Carpo Roadshow www.carpo.dk
Erics Posted September 13, 2019 Report Posted September 13, 2019 You can only have one Show on an FLX S. If have to choosen over different shows you have to use a usb memory stick. I have just a little USB stick that can be always connected in the desk. So it is always ready. From time to time you should make a backup from it. Quote I use: Zero 88 FLX S48 / ETC ColorSource 40 / GLP Creation 4096 / Chamsys MQ70 / Madrix
Carpo Posted September 13, 2019 Author Report Posted September 13, 2019 Thank you for the help. Great idea with a Nano USB drive. No problem having the USB drive connected all the time? Thinking specially about start up.......... Quote Carsten Poulsen Carpo Roadshow www.carpo.dk
Edward Z88 Posted September 13, 2019 Report Posted September 13, 2019 Hi Carpo, As Eric says, ZerOS consoles can only store the current show file on board. Other show files can be saved to external storage. There’s no issue leaving USB sticks plugged in all the time on FLX series consoles. Many people use the nano USB sticks and leave them in, to ensure they don’t get snapped off. On Solution series and legacy ZerOS consoles, leaving USB sticks in on start up will cause a boot error. Hope this helps, Edward Quote Edward Smith Product Specialist Email Support
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.