Jump to content
Zero 88 Community Support Forum
Sign in to follow this  
RogerA

Effects / use and control effects

Recommended Posts

Hi, 

I work with Solution console and  I would like to programming changes, something to do advanced light handling and not just turn-on /off. 

After read again et again I don't undertand if understand if is possible to apply effects in playbacks, memmories  or submaster with any ligths or just with some of them. I work with  Cameo Flat Pro 18 (LED), Ignition Strip Blinder X  ( hallogens) and classic ligths ( Juillat, ADB,etc) . Before  having added my fixtures and created palettes , I can't apply effects. (Only one option is possible and does not work). 
I ve sear

 

Share this post


Link to post
Share on other sites

Hi Roger,

If you are running the latest release software, when you press "Automatically Create Effect Palettes" 45 auto effects should be created. ZerOS 7.9.5 is the latest release software for Solution. If only one effect palette is created, please try installing ZerOS 7.9.5 again.

ZerOS 7.9.5 can be downloaded from our website here...

Installation instructions can be found here...

http://support.zero88.com/1518910761

Hope this helps, if you have any questions let us know.

Edward

Share this post


Link to post
Share on other sites

Hi Edward, 

yes  installed it again and it works. THANKS. I have spent many hours circling without finding a response.


I have some  MKF with red led on and others redl Led off. I think that depend what kind of fixture I having selected

Now, I'ill try to creat my effects : turn-on, one by one , any lamp on my strip blinder ( with 10 lamps) to manage differents options.

any suggest ?

 

Thnaks again

Share this post


Link to post
Share on other sites

Hi Roger,

Is the strip blinder patched as a single fixture on your Solution or as 10 individual dimmers? If patched as 10 individual dimmer channels, you can use the automatic Chaser effects, and apply an offset. If you have a single fixture patched with each Lamp under the "Beamshape" attribute, you will need to go to the Waveforms tab of the Effects window, and apply a Sine wave, speed, size and offset for each lamp. To open the Effects window, hold SHIFT and tap EFFECT.

Hope this helps, if you have any questions let us know.

Edward

Share this post


Link to post
Share on other sites

Hi Edwards, 

many questions.

1)

On 9/6/2019 at 3:22 PM, Edward- Z88 said:

Hi Roger,

Is the strip blinder patched as a single fixture on your Solution or as 10 individual dimmers? If patched as 10 individual dimmer channels, you can use the automatic Chaser effects, and apply an offset.

 

I tried that and it did not work.

2)

 

On 9/6/2019 at 3:22 PM, Edward- Z88 said:

If you have a single fixture patched with each Lamp under the "Beamshape" attribute, you will need to go to the Waveforms tab of the Effects window, and apply a Sine wave, speed, size and offset for each lamp. To open the Effects window, hold SHIFT and tap EFFECT.

 

I tried that also and it did not work.

3)

At last....not MACROS  in console after update

 

Edited by Edward- Z88
Font size reduced

Share this post


Link to post
Share on other sites

Hi Roger,

Please send a copy of your show file to support@zero88.com, and one of the team will be able to take a look to see why the effects are not working for your strip blinders.

If you have any questions let us know.

Edward

Share this post


Link to post
Share on other sites


Hi Edward,

I received your e-mail and I managed to program an effect with an offset. I appreciate your help. But I can not apply the effects on the 10 individual dimmers for the Stripblinder.

Thanks.

Roger

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.