Romec Posted July 18, 2019 Report Share Posted July 18, 2019 Hi All, I have a question about macro’s. is it possible to record multiple command (lines) in a single macro? Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted July 19, 2019 Report Share Posted July 19, 2019 Hi Romec, When recording a macro, you have the option to record keys, or commands. If you choose commands, anything that gets written in the command line will be stored, until you press the MACRO button. Then when you recall the macro, all commands will be replayed as a single string. Hope this helps, Edward Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Romec Posted July 19, 2019 Author Report Share Posted July 19, 2019 Hi Edward. Thank you for your advise. I have a whole lot more questions now. Let’s see if I can write them down 1: if I made a macro. Can I change it afterwords? And can I see the command-feedback (so that I know what I did) 2: so a macro can only contain 1 string of commands, right? 3: what would be the right syntax if I would overwrite a preset? (EG: fixture X at preset Y , store / overwrite) thats it it for now thank you! Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted July 19, 2019 Report Share Posted July 19, 2019 Hi Romec, 1 hour ago, Romec said: 1: if I made a macro. Can I change it afterwords? And can I see the command-feedback (so that I know what I did) When macros have been programmed, they can't be edited. When you recall a macro, you will see the commands being typed in the command line. If you wish you can slow the playback speed. To do this hold SETUP and tap the Macro tile in the macros window, and from the Speed drop down choose Slow. 2 hours ago, Romec said: 2: so a macro can only contain 1 string of commands, right? Macros can include as many button presses as you wish. 2 hours ago, Romec said: 3: what would be the right syntax if I would overwrite a preset? (EG: fixture X at preset Y , store / overwrite) If you wanted this to be a macro, you would tap RECORD -> MACRO -> 1 -> Commands -> [fixture number] -> [attribute key followed by palette number] -> RECORD -> [attribute key followed by palette number you wish to overwrite] -> ENTER -> MACRO. Edward Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Romec Posted July 19, 2019 Author Report Share Posted July 19, 2019 Hi Edward, thank you so much for your help. It has been very helpful! About the speed, is this utilized when a macro needs a bit more time to execute? Or what would be the purpose of slowing down the macro? Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted July 19, 2019 Report Share Posted July 19, 2019 Hi Romec, That's correct, in some situations you may want the steps of the macro to execute over a longer period - for example when entering or exiting Setup using a "keys" Macro. Edward Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Romec Posted July 20, 2019 Author Report Share Posted July 20, 2019 Thanks a lot man! This was really helpful Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted July 20, 2019 Report Share Posted July 20, 2019 Hi Romec, No problem - if you have any other questions just let us know. Edward Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.