Benjamin Newton Posted July 13, 2019 Report Share Posted July 13, 2019 Hello I edited a fixture profile on my PC to remove the annoying "feature" whereby the strobe effect is the second half of the intensity fader. I installed it with the same name as the original which caused an issue. It worked fine until I power cycled the console whereupon the desk reverted to the original fixture profile. Is it possible to delete the original fixture profile? Or do I just need to use a different name (which is what I've done and it works)? Many thanks Benjamin Quote Link to comment Share on other sites More sharing options...
kgallen Posted July 13, 2019 Report Share Posted July 13, 2019 Different name is all I know. There have been a number of enhancement requests for this to be improved, including from me, as I have the same gripe. Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted July 13, 2019 Report Share Posted July 13, 2019 Hi Benjamin, Did you swap your original fixture to your edited fixture? If so did you power cycle the console before exiting Setup? Changes made in setup are not stored until you exit setup, which may be why you changed the fixture, power cycled, and the old one was back again. There is no way of deleting fixtures from the library on the console. As Kevin says, when loading in fixture profiles make sure they are named differently to those already in the library, otherwise you won’t be able to tell the difference between the two. Hope this helps, Edward Quote Edward Smith Product Specialist Link to comment Share on other sites More sharing options...
Benjamin Newton Posted July 15, 2019 Author Report Share Posted July 15, 2019 Thank you both. Now I know what to do in the future. Benjamin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.