Jump to content
Vari-Lite Controls Support Forum

Record one Parameter


ClaudeG

Recommended Posts

The theory is you just record the tagged parameters. For intensity this should be easy as if you just alter the brightness of a fixture that’s the only thing recorded and all other parameters will track. 

Make sure in Record Options both Snapshot and SmartTag are off i.e. blue

Link to comment
Share on other sites

Hello,

As Kevin says, only parameters that you change will be recorded, if SmartTag is disabled. To access the Record Options, you can press and hold RECORD. In here ensure SmartTag has a blue stripe, meaning deselected. 

From now on, if you simply push up channel faders for your fixtures and tap RECORD, only intensity will be stored. 

Hope this helps,

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Hi Claude, 

If so, your console is in basic programming mode. To change this, press SETUP -> Settings, and ensure Tracking Options are enabled. Then exit SETUP, and press and hold RECORD. The SmartTag option should be available - ensure that the console also has “Cue Only” selected, unless you would like to program cue stacks with tracking behaviour. 

Hope this helps,

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.