Jump to content
Vari-Lite Controls Support Forum

Problem on FLX


van den abbeele Eric

Recommended Posts

During recording this afternoon I have had a window with message error.

I send you the file on support@...

 

Can you what s wrong ? I ve performance tonight.

 

So I must try to continue to recording the performance...

 

thank for your help

 

Eric 

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 3 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 5 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 5 PARWASH 19 X 15w // 10 Spot 200w // 19 Wash Par 12 X 18W   // 2 BOWLDER 12X40w WASH // 11 PARZOOM 19 X 15w

Link to comment
Share on other sites

Hello,

 

I ve had a answers from Keith Rogers. 

 

So now I m just asking If I can try to go on 7.9.5 for the 4 last performance I have until 8/9 July... Or if it s better to stay on 7.9.4. and wish in all the case to haven't a fatal Crash and having no more FLX for doing lastest performance ... With all that can be negative for future performance... 

I ve no one beside me with a FLX to share or Rent... 

 

Thank for your help 

 

Eric

 

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 3 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 5 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 5 PARWASH 19 X 15w // 10 Spot 200w // 19 Wash Par 12 X 18W   // 2 BOWLDER 12X40w WASH // 11 PARZOOM 19 X 15w

Link to comment
Share on other sites

And just a question if I doing Update...

 

Fixture will be delete too ? Or fixture that I ask and have installing on FLX must be install again ?

 

Thank a lot

 

Eric VDA

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 3 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 5 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 5 PARWASH 19 X 15w // 10 Spot 200w // 19 Wash Par 12 X 18W   // 2 BOWLDER 12X40w WASH // 11 PARZOOM 19 X 15w

Link to comment
Share on other sites

Hi Eric,

I'd stay with 7.9.4 for your shows. Do you have effects? Migrating to 7.9.5 without time to review what the impact of 7.9.5 might be on your effects would not be wise in the middle of your production run. Anyway I had a desk freeze with 7.9.5 the other day so there is no guarantee your crash concern has gone away. Yes, I experienced a number of desk lockups too on FLX with 7.9.4.

I'm in a production run now on 7.9.5 and hoping for no more misbehaviour (dress rehearsal went ok last night)...

Good luck!

Kevin

Link to comment
Share on other sites

Hi Eric,

As Kevin says, if you wish to load your ZerOS 7.9.4 show file into ZerOS 7.9.5, make sure you have plenty of time to work through it to ensure it looks the same as you programmed it. As mentioned in the release notes, effects may be slightly different in ZerOS 7.9.5 due to the updated effects engine.

ZerOS 7.9.5 does include many performance enhancements, we are trying to find what caused the random lockup Kevin mentioned. 

14 hours ago, van den abbeele Eric said:

Fixture will be delete too ? Or fixture that I ask and have installing on FLX must be install again ?

All user fixtures will be removed when performing a software update. If you have user files contained in your show file, these will be loaded in with the show file. If you have custom fixtures that aren’t contained in Fixture Library 37, your easiest option would be to use the Fixture Editor software for PC to import all fixtures into a single .ift file, and then simply load it into the console. I would also recommend you email these fixtures to us at FixtureSupport@zero88.com, so that we can contain them in the next Fixture Library update. 

Hope this helps,

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Hello

Thank you for your answers.

In fact last 4 shows at the level of effects and memories to zero.

(Only one show uses the previous implementation because spotlighting projectors are identical ...)


So if 7.9.5 is different mainly in terms of effects it is not for me embarrassing.

What worries me the most is that my different versions are non-software but hardware as evoked in another post or mail ...

And so, that's what we did, these are the ones that were mounted on the screen and on the scene without moving the fader, or the micro interruptions of current in the traditional projectors that I had time in time this last WE.
The worry is that all this is random. Sometimes nothing for 2 or 3 hours and then suddenly it comes and repeats several times. That is to say that even send in service after sale, I do not know if all this will be seen like that ...

In any case thank you for your help and I'm still thinking about this or not staying on 7.9.4 ... or 7.9.5 .....

See you soon


Eric

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 3 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 5 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 5 PARWASH 19 X 15w // 10 Spot 200w // 19 Wash Par 12 X 18W   // 2 BOWLDER 12X40w WASH // 11 PARZOOM 19 X 15w

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.