Jump to content
Vari-Lite Controls Support Forum

ZerOS 7.9.5 Released


Jon Hole

Recommended Posts

Zero 88 are pleased to announce the launch of ZerOS version 7.9.5 software - a new software release for ORB Series, Solution Series, FLX & FLXS, SCD Server (& Pro) and Leap Frog 48 & 96.

More information can be found at zero88.com/software/zeros

If you have any questions, please don't hesitate to contact us at the office. Our contact details are:

email: support@zero88.com
phone: 01633 838088

Best Regards,

Jon Hole
Global Product Manager, Systems and Control

Link to comment
Share on other sites

Installed and working fine, we have already used the new effects for 'Ultrabeat' in concert over the weekend. 

The 'Warning' effect, with or without offsets works great over our chases on the sunstrip blinders for high energy numbers.    

Keep up the good work.

Link to comment
Share on other sites

Steaming ACN and Artnet no longer works. I have only tried on phantom with my unlock dongle and will try on the console later this week,  when i downgrade to Zeros 7.9.4 it works fine again.

this is rendering the phantom and unlock dongle useless as i cant control my fixtues i hope it is not the same story for the console.

i did highlight the problem in the beta group, I asume the fix never made it to the release.

cheers

 

Link to comment
Share on other sites

On 5/20/2019 at 10:04 AM, Peachy001 said:

Installed and working fine, we have already used the new effects for 'Ultrabeat' in concert over the weekend. 

The 'Warning' effect, with or without offsets works great over our chases on the sunstrip blinders for high energy numbers.    

Keep up the good work.

Hi Peachy,

How have you got your unstraps set up ? As a 10 channel set of dimmers or in 10 channel DMX mode ? 

 

thanks

Martin

Link to comment
Share on other sites

22 hours ago, keredyelesob said:

Steaming ACN and Artnet no longer works. I have only tried on phantom with my unlock dongle and will try on the console later this week,  when i downgrade to Zeros 7.9.4 it works fine again.

this is rendering the phantom and unlock dongle useless as i cant control my fixtues i hope it is not the same story for the console.

i did highlight the problem in the beta group, I asume the fix never made it to the release.

cheers

 

Me too. Can't upgrade to get the new fx as Artnet isn't working. 

Link to comment
Share on other sites

Hello,

 

Glad to see that new version is here.

 

Questions :

What news on for FLX ?

 

I will finish my seasons and going on this new version on middle July. 

For a actual manual, have you news ? 

The last manual I find was for 7.9.1.... And some things are different between 7.9.1 and 7.9.4

 

Thank a lot

 

Eric

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 4 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 4 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W   // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w  // 7 LY 400 - BSW CMY LED 400w

Link to comment
Share on other sites

Hello,

 

I m download 7.9.5 and see what news on ... Really interesting

 

I prefer to wait and finish performance... But it s look good !

1 FLX + 1 wing  "7.14" + 1  FLX "7.13" & 4 Wings  / 2 Touchscreen  // Jester 24/48 

2 Swisson XND-4R5 ENode  // Stairville : 4 Wash MZH 19X15w  - 31 Retro Flat Par 18X 12w RGBW 

Electroconcept : 36 Wash 18 X 10w Q188 //  ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w  - VARYTEC : 12 Varytec Hero Wash 300 FC

LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W   // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w  // 7 LY 400 - BSW CMY LED 400w

Link to comment
Share on other sites

On 5/21/2019 at 3:19 PM, SimonH said:

Me too. Can't upgrade to get the new fx as Artnet isn't working. 

Hi Simon,

To confirm, are you finding Art-Net isn't working on your physical console?

Art-Net is working on physical consoles running ZerOS 7.9.5, however not on Phantom ZerOS with an unlock dongle.

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

On 5/23/2019 at 12:33 PM, Edward- Z88 said:

Hi Simon,

To confirm, are you finding Art-Net isn't working on your physical console?

Art-Net is working on physical consoles running ZerOS 7.9.5, however not on Phantom ZerOS with an unlock dongle.

Edward

Hi Edward,

yes this is on my FLX. 

Simon

Link to comment
Share on other sites

Hi Simon,

Art-Net does seem to be working correctly in ZerOS 7.9.5. After loading in your show file with Art-Net transmitting, have you disabled and then enabled Art-Net again?

If this problem is persisting please email your ZerOS 7.9.5 show file that isn’t working, along with a brief description of your network to support@zero88.com, and we’ll be able to investigate your issue further. 

Any queries just let us know.

Edward 

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

On 5/21/2019 at 11:43 AM, Martin Burton said:

Hi Peachy,

How have you got your unstraps set up ? As a 10 channel set of dimmers or in 10 channel DMX mode ? 

 

thanks

Martin

Hi Martin,

We've got each Sunstrip setup in 10 channel DMX mode.  I find if you create a chase and record it to a playback then use an effect like 'Warning' over the running chase, it gives you a better eye catching effect. 

Fingers cross this will become easier when Zero88 release ZerOS with pixel mapping.

Link to comment
Share on other sites

On ‎5‎/‎25‎/‎2019 at 7:37 PM, Edward- Z88 said:

Hi Simon,

Art-Net does seem to be working correctly in ZerOS 7.9.5. After loading in your show file with Art-Net transmitting, have you disabled and then enabled Art-Net again?

If this problem is persisting please email your ZerOS 7.9.5 show file that isn’t working, along with a brief description of your network to support@zero88.com, and we’ll be able to investigate your issue further. 

Any queries just let us know.

Edward 

Hi Edward,

I tried installing 7.9.5 and the same occurred. I have a link showing on my Artnet node but no activity. I set up a simple patch with my 15 LED PARS on universes 1 and 2 just to see but nothing shows up in the system info network page unlike 7.9.4 where it shows the streaming info.

I've attached my file to see if I'm doing anything wrong. I've plugged the desk direct to the Artnet node bypassing my network.

Simon

artnet test.isf

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Hi Jon

I am trying to update my college's FLXS 48 to 7.9.5 from 7.9.4  when i load the software it tells me that there is no file to upgrade to? i have downloaded it from work and from home and have got the same response each time. any ideas?

thanks Steve

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.