Effect and FLX ?

[van den abbeele Eric]

Hello,

I have questions about the aspect of the effects.

1 / For some light consoles (Chamsys, GrandMa, etc.), the aspect of the effects is a great strength.
We can quickly do something that can be thrilling for an audience ...

The effects can as much play on
- the movement of a projector
- Color change
- gobo change
- play on the opening of the Zoom,
- opening prism closure,
etc ..
- and several actions grouped with some ease ...
.

For the FLX, this part will be able to evolve to increase during a show the capabilities of animations?

2 / if I program imagine in the "playback 1", a sequence of various motions in chase version (40 cues for example), can I recall this playback in a master cue playback and if so how to proceed?

Thank you for your patience to answer us and see you soon,

Eric

[Edward Z88]

Hi Eric,

The 32 effects on FLX currently adjust Intensity, Position, Colour, and Beam. In ZerOS 7.9.5, this will be increased to 45 auto-effects, including improvements on the existing, and many new effects. 

On 5/15/2019 at 12:35 PM, van den abbeele Eric said:

2 / if I program imagine in the "playback 1", a sequence of various motions in chase version (40 cues for example), can I recall this playback in a master cue playback and if so how to proceed?

To do this, you will need to trigger playback 1 from a cue in the Master Playback. To do this go into the Cue Settings in the cue in the master playback you wish playback 1 to be triggered by. Then press Macros..., and next to Trigger Cue Stacks click Add. Any programmed playback buttons on the console will then flash, which allows you to tap playback 1 to trigger it. Click OK on the macros window, and then the Cue Settings. When you go into this cue, as well as the cue running playback 1 will be triggered too.

Hope this helps,

Edward