drscoop Posted May 4, 2019 Report Share Posted May 4, 2019 Hi, Is there a way of assigning the master cue fader to control the cue stack intensity, instead of releasing the cue list and returning to cue 1? I have a scene where I would like to repeatedly fade out the cue list to blackout, busk an impromptu section, then fade back to the prior state. I could insert a blackout cue, bring up the other cues on the playback faders, then swap back, but I need to do this several times in quick succession, and just dropping the fader would be helpful... Or is there another clever way around this? Thanks, as always, for answering all these questions! Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted May 5, 2019 Report Share Posted May 5, 2019 Hello, To do this, hold SETUP and tap the Master Playback’s button to enter its settings. Then tap Raise and Lower, and Disable Release On Lower. This means when you lower the fader, the cue stack won’t release, and you’ll stay left in the current cue. Click OK to save the settings. To manually release the playback, you can then hold CLEAR and tap the Go button. Hope this helps, if you have any queries let me know. Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.