Flx s48 auto problem

[jimbo-nomads]

I have a cue with general stage lighting plus a set of led bars simulating early morning. The next cue is a cross fade to bright morning on the led bars over 5 minutes. Done manually on the go button the stage stays up and the led bars crossfade colours. Done automatically the whole stage goes dark and comes back over the 5 minutes with the colour fade.

Any ideas?

[Edward Z88]

Hello,

Interesting, can’t think of any reason this may be happening. Please could you attach your show file the problem is present in, and list the cues that are causing the issue?

All the best,

Edward

[jimbo-nomads]

Thanks. I'm next at the theatre on Monday & will grab the show file then.

[Edward Z88]

Hello,

Great ok thanks for letting me know.

(You seemed to have created a duplicate post which I have deleted.)

Edward

[jimbo-nomads]

show file attached. It's the second fade cue that's the problem. (There is a long wait before the 1st fade goes)

Moonlight.isf

[Edward Z88]

Hi Jimbo,

I have loaded your show file into Phantom ZerOS and have taken a look. I can't seem to recreate the issue you are seeing. 

I have gone into cue 5 from cue 4, and also cue 13.5 from cue 13, and the 5 min cross fade runs correctly. Adding in Auto After or Auto With triggers on cues 4 or 13.5 also results in a smooth crossfade running from the previous cue, without the whole stage going dark.

Could you confirm it is these cues?

Edward

[jimbo-nomads]

Cue 4 to 5 happen 10 pages apart. The problem shows itself from 13 to 13.5. Tonight is the last performance so won't be able to check it out for some time now. Thanks for looking at it and I'll get back to you at some point.

[Edward Z88]

Hello,

OK no worries. If you have any queries let me know. 

Edward