Limeburner Posted September 28, 2018 Report Posted September 28, 2018 Sorry if this is obvious but I can't find the BACK button when I want to go back a cue in a stack of cues. Also I there a way to have a cue auto follow-on with a delay time? 🙄 Quote
Jon Hole Posted September 28, 2018 Report Posted September 28, 2018 Hi, The “Pause” button is also the back button - press it twice to go back a cue (and then one more time for each additional cue you want to go back). In “Cue Settings” oh can set trigger to “Auto with” or “Auto after”. Choosing either of these options displays a wait time. Hope this helps, Jon Quote Jon Hole Global Product Manager, Systems and Control
Limeburner Posted September 29, 2018 Author Report Posted September 29, 2018 I was not using the main playback but the submasters and their associated flash buttons as the GO button. That pause button didn't seem to have an effect on them. Quote
kgallen Posted September 29, 2018 Report Posted September 29, 2018 Use SETUP+PB button and set the shifted option to Pause. Then button=GO, shift+button=Pause/Back Quote
van den abbeele Eric Posted October 22, 2018 Report Posted October 22, 2018 It's very interesting to know that the pause button allows to have and by tapping twice, the possibility to go back. It was something that I was doing by pressing the GO button and calling the previous number ... So just for information if we press this button once because we need a break, what time do we have for the FLX does not confuse a return back and a pause and restart immediately the effect in short? And so is there a visual indication on the screen that allows us to know that we are in reverse? When we want to start again, how do we do it? Should he press the "GO" button? thank you so much. Eric Quote 1 FLX + 1 wing "7.14" + 1 FLX "7.13" & 4 Wings / 2 Touchscreen // Jester 24/48 2 Swisson XND-4R5 ENode // Stairville : 4 Wash MZH 19X15w - 31 Retro Flat Par 18X 12w RGBW Electroconcept : 36 Wash 18 X 10w Q188 // ADJ 2 Spot Focus 4Z & 2 Spot Focus 5Z Led 200w - VARYTEC : 12 Varytec Hero Wash 300 FC LedStage : 10 LS200 - Spot 200w // 19 Wash Par 12 X 18W // 12 BOWLDER 12X40w WASH // 12 PARZOOM 19 X 15w // 7 LY 400 - BSW CMY LED 400w
Edward Z88 Posted October 23, 2018 Report Posted October 23, 2018 Hi Eric, If you tap Go, and then part way through the fade tap Pause, the cue transition will be paused. In the cue list window you'll be able to see the progress bar is paused, and both the Pause and Go buttons will be flashing. Pressing Pause a second time however, will go back to the previous cue. On FLX, SHIFT + PAUSE will act as Snap back, snapping back to the previous cue ignoring fade times. If a cue transition has completed, double tapping Pause will go back a single cue. To resume running the cue list in the usual way, tap Go once, and you'll either continue the fade time that was paused, or go into the next cue. Hope that helps, Edward Quote Edward Smith Product Specialist Email Support
johnlwalker Posted October 24, 2018 Report Posted October 24, 2018 This is very interesting fact about black button of flex. It is help to run fast to movement. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.