FLX S24 with GLP YPOC 250 Colour Beam Pallets

[nhirt]

Hello everyone,

1.) I have the FLX S24 and The GLP YPOC 250, the fixture is aviable for the GLP but there are no Colour and Beam Pallets in the Fixtrue Library of the FLX S24. My question, are there no prerecorded/automatically createt, Color and Beam Pallets? Or what do I do wrong? 

2.) If there are no pallets from Zero88 and I will patch some new, how can I store these pallets to the fixture(that i have the pallets after an reset, Software Update)? And how do I get the little peak of color like that one of the automaticly created pallet from the ADJ 12 HEX?

Thanks!  

Norman

 

[Edward Z88]

Hi Norman,

Colour and Beam auto palette information is stored in the fixture profile itself. Looking at this fixture in version 36 of the library, this information is missing. I will therefore update this fixture for you, and post back later with an updated file when the colour and beam details have been implemented.

Edward

[Edward Z88]

Hi Norman,

Please find attached the updated fixture file for the GLP YPOC 250...

GLP YPOC 250 Details Update.ift

Copy this file to USB, and then plug into  FLX S24. Then tap SETUP -> Load FIle, and choose the file to load in. Then go to your Fixture Schedule, and select all your GLP YPOC 250 fixtures. Tap Change all Profiles, and you should see there is an updated version in the library that you can replace your existing fixtures with. This new fixture now contains details such as colour and gobo information. 

For future fixture requests, feel free to send us an email to "FixtureSupport@zero88.com" - our dedicated fixture support email address.

If you have any queries please let me know.

Edward

[nhirt]

Hi Edward,

Thank you for the support.

Best Regards

Norman