Mort2376 Posted April 18, 2018 Report Share Posted April 18, 2018 Hi Folks, Newbie here so please be gentle. Got an issue with 1 of our betapack 1's. Channel 3 if you turn it on via demux or analogue desk it comes on to about 60% but brings CH4 on with it to 60%. Same applies if you bring up CH4 first. But if you bring both 3 and 4 up both come on to 100% when full Is this something simple ? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
iank99 Posted April 20, 2018 Report Share Posted April 20, 2018 I'd be looking at the control cable for that rack first (they do fail!) - sounds like a whisker touching two pins. After that, you'll need to take the mainboard out to check that - if you're happy fault finding a PCB using a multimeter and a soldering iron, then it should take about an hour plus removing/replacing the PCB. Or... You could send it me to look at - The Service Guy Quote Ian Knight aka The Service Guy - www.serviceguy.co.uk Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.