lentille Posted April 5, 2018 Report Share Posted April 5, 2018 Hello I some time use a Jester 24/48 . I am surprised that DMX patch in 'super user' is not live on this desk? is it customizable or an older soft version? Quote Link to comment Share on other sites More sharing options...
Jon Hole Posted April 7, 2018 Report Share Posted April 7, 2018 Hi lentille, Please could you explain a little further? Jon Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
lentille Posted April 8, 2018 Author Report Share Posted April 8, 2018 Hi Jon Patch Live or Blind? Patching in Live will set the selected DMX output to full , and set all other dimmers to zero so you can see what’s connected to that dimmer. Patching in Blind will not affect outpout When i patch on the Jester 24 48, it is blind, no DMX send in the output of board. So i would like to know if there is a way to patch in Live? lentille Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted April 9, 2018 Report Share Posted April 9, 2018 Hi Lentille, When in <DMX Patch> on a Jester, the channel faders do Output Live. So if you set a DMX address, and apply a channel fader to that address, raising that channel fader will bring that DMX channel on. Hope that helps Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.