Jump to content
Vari-Lite Controls Support Forum

Houselights / Independent Faders


martin-144

Recommended Posts

Of source - you have 241 playbacks on FLX and in it's simplest form with a single cue, a playback is what we used to call a submaster.

<set up lighting>

RECORD <select playbacks page, press button under multi-function fader>

CLEAR-CLEAR

Push up fader!

Easy peasy :D

You might want to visit the options under SETUP+MFF button and the cue window for that playback, VIEW+MFF button, to set fade times.

Link to comment
Share on other sites

16 minutes ago, kgallen said:

Of source - you have 241 playbacks on FLX and in it's simplest form with a single cue, a playback is what we used to call a submaster.

<set up lighting>

RECORD <select playbacks page, press button under multi-function fader>

CLEAR-CLEAR

Push up fader!

Easy peasy :D

You might want to visit the options under SETUP+MFF button and the cue window for that playback, VIEW+MFF button, to set fade times.

Hi,

it is clear to me how I can program a sub or playback to control our house or working lights. What I don't want is that these playbacks are stored into any other cues or  playbacks when they are on while recording. (It can happen that houselights are on during rehearsals, but I dont want to have them saved in my show). Hope it is clearer now.

Martin

Link to comment
Share on other sites

Hi Martin,

The easiest way to do this is to Program with SmartTag disabled. SmartTag is an option you may have seen in the Record Options pop-up, that opens when you tap RECORD. If SmartTag is disabled, when you tap record only tagged parameters will be recorded. Tagged intensity parameters are displayed as red values in the output window, and tagged parameters are displayed with blue backgrounds behind their encoder displays. This therefore means channels from Playbacks will not get Recorded, as they are blue values rather than red. You can turn SmartTag off in the Record options pop up, by tapping Smart Tag so that it has a blue stripe next to it.  

The link Kevin sent a link to, is Jon explaining another useful programming tool for this, which is an Inhibit Playback. What you can do, is record your cues normally with SmartTag enabled, recording your whole lighting state for each cue including the haze. However, in the Playback settings of your Hazer Playbacks, change the fader function to Inhibit. This Playback now acts as a Grand Master for the Hazer. Therefore when the fader is at full, the haze level from the Recorded cues will be output, but if you need the level taking down you can use your Haze Playback to inhibit the level of haze. 

Hope that helps and makes sense, any queries let me know. 

Edward

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

2 hours ago, Edward- Z88 said:

The link Kevin sent a link to, is Jon explaining another useful programming tool for this, which is an Inhibit Playback. What you can do, is record your cues normally with SmartTag enabled, recording your whole lighting state for each cue including the haze. However, in the Playback settings of your Hazer Playbacks, change the fader function to Inhibit. This Playback now acts as a Grand Master for the Hazer. Therefore when the fader is at full, the haze level from the Recorded cues will be output, but if you need the level taking down you can use your Haze Playback to inhibit the level of haze.

Edward - excellent explanation/example of Inhibit - I now understand how it works (and I might even use it now!!!)! Great job!

Link to comment
Share on other sites

Ok, I think I now understood what Inhibit does. It acts as a Master fader for a channel which is already "on" in any other cue or playback.

This is not exactly what I need. I would like to have a Submaster which is not taken into account when storing cues, playbacks or so.

If using Inhibit this would mean I have to have my houselights "always on" and turn them down using Inhibit. Not very convenient. Is there another way?

Thanks,

Martin

Link to comment
Share on other sites

You could try parking your house lights channel instead of having it on a fader. I'm not entirely sure but it shouldn't record parked levels (other desks work like this). You can set up one of the UDKs as a park button then set its shift function to unpark. Then just use the syn tax to set your level and hit park. 

 

Are you programming in tracking or non tracking? 

Link to comment
Share on other sites

14 hours ago, martin-144 said:

Ok, I think I now understood what Inhibit does. It acts as a Master fader for a channel which is already "on" in any other cue or playback.

This is not exactly what I need. I would like to have a Submaster which is not taken into account when storing cues, playbacks or so.

If using Inhibit this would mean I have to have my houselights "always on" and turn them down using Inhibit. Not very convenient. Is there another way?

Thanks,

Martin

Hi Martin,

Yes, the other way is to program with SmartTag disabled, so that Playbacks are not recorded into cues.

13 hours ago, AshA101 said:

You could try parking your house lights channel instead of having it on a fader. I'm not entirely sure but it shouldn't record parked levels (other desks work like this). You can set up one of the UDKs as a park button then set its shift function to unpark. Then just use the syn tax to set your level and hit park. 

 

Are you programming in tracking or non tracking? 

Ash is correct, FLX won't record Parked levels. Therefore during plotting, you could set your hazer so it is slowly pumping haze, and park your hazer channels. The hazer will then stay at this level, not getting recorded into any cues, until you select those fixtures and unpark them.

You can read more about Parking here...

http://support.zero88.com/1011403601

Hope that helps,

Edward

 

Edward Smith
Product Specialist
Email Support

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.