Carwyn Posted March 2, 2018 Report Share Posted March 2, 2018 Hi Guys and Gals I Need to build a fixture up, it is basically led tape which I've installed on the steps at the venue. controlls need to be RGB and intensity the controller is a 3 channel controller so how would i get the intensity to control the whole unit then HELP Quote Link to comment Share on other sites More sharing options...
kgallen Posted March 2, 2018 Report Share Posted March 2, 2018 If I understand you correctly, you have RGB LED tape and the driver (not really "controller") is 3 channel. This is fine, you can have a "virtual intensity" channel - so 4 channels on your lighting desk and 3 DMX channels to the driver. There will be an RGB+virtual intensity already in the fixture library, or just build one in the Fixture Editor. Or attached which is one I built myself for RGB LED tape: led_rgb_vi.ift Quote Link to comment Share on other sites More sharing options...
Carwyn Posted March 2, 2018 Author Report Share Posted March 2, 2018 All done now mate werent looking at the fixture editor properly Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.