Jump to content
Vari-Lite Controls Support Forum

Chauvet par hex 12


geevee

Recommended Posts

Is there a limit on the number of chanels I can run the par hex 12 on, currently running 6 but would like to use the 8 ,12 or 13. have installed driver(.ift) for 12 channel and have enough space allocated but it does not even produce RGB.

board is a frog with 3.5 drive

Link to comment
Share on other sites

Hi geevee,

 

First just to check, is your desk a Fat Frog or above with dedicated fixture support?

 

(Within reason) you can have as many channels as you like for a fixture. Your 12 or 13 channel fixture will be fine. Where there are more parameters per attribute, then you page through in multiples of 3 with the attribute button. So say you have 7 colour parameters, then you will have 3 pages (3+3+1 usually) of colour parameters, and cycle through those pages with the Colour button.

 

Have you written your own fixture definition for your PAR Hex or is it from the Zero88 library? If you want to attach it, and a link to the manual here, then we can check it out for you.

 

Regards,

Kevin

Link to comment
Share on other sites

Hi geevee,

 

Yes I mean the 12 buttons on the right! Good stuff. Ill take a look at the fixture definition today against the manual (unless Ed beats me to it).

 

Have you made sure the fixture is set for the 12 channel mode and you will find there is also a dimmer channel so make sure you select Brightness and wheel up to get non zero. I suspect you are used to the 6 channel mode then just has a channel per colour. Also try selecting the fixture and pressing Home.

Link to comment
Share on other sites

Hi geevee,

 

It wasn't clear to me which was the fixture definition in the Zero88 library for the COLORdash Par-Hex 12, so I've built fixture definitions fresh from the manual for 3,6,8,12 and 13 channel modes.

 

Find attached. Please give this a go and hopefully you'll get your lights working.

 

On the 3ch fixture I'm not sure what to set the defaults to for HSI/HSV so maybe Ed could take a look at this and add to the Zero88 library.

 

Many of these definitions have multiple pages of parameters, so press colour/beamshape repeatedly to get to the other pages. Where the mode does not have a dedicated dimmer channel, I've added a virtual dimmer so you will need to use the Brightness button and wheel. The Home values are R=G=B=dimmer=255.

 

Let us know how you get on with this!

 

Regards,

Kevin

cd_parhex12.ift

Link to comment
Share on other sites

Hi geevee,

 

It wasn't clear to me which was the fixture definition in the Zero88 library for the COLORdash Par-Hex 12, so I've built fixture definitions fresh from the manual for 3,6,8,12 and 13 channel modes.

 

Find attached. Please give this a go and hopefully you'll get your lights working.

 

On the 3ch fixture I'm not sure what to set the defaults to for HSI/HSV so maybe Ed could take a look at this and add to the Zero88 library.

 

Many of these definitions have multiple pages of parameters, so press colour/beamshape repeatedly to get to the other pages. Where the mode does not have a dedicated dimmer channel, I've added a virtual dimmer so you will need to use the Brightness button and wheel. The Home values are R=G=B=dimmer=255.

 

Let us know how you get on with this!

 

Regards,

Kevin

 

Hi Kevin,

 

Thanks for making that. I have ensured that the Chauvet COLOR series fixtures are clearer in the next fixture library update.

 

Default values for Hue: 0, Saturation: 255, Intensity/Value/Dimmer: 255.

 

Kind regards

Edward

The Chauvet COLORdash PAR-Hex 12 can be found in Fixture Library Release 34 here...

 

Kind regards

Edward

Edward Smith
Product Specialist

Link to comment
Share on other sites

Thanks Ed.

 

Let me update this fixture with those defaults and I'll add the fixture image too (forgot last night), then I'll email it across to you. The attached should be fine for geevee as he doesn't want the 3ch version - but I'll update the attached anyway for him later when I've made the mods.

 

Thanks!

Kevin

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.