Releasing channels

[terryb]

Just getting to grips with my first big show on the TLXtra after using an ML24. Apart from the buttons being in the 'wrong' place all is going reasonably well!

I am learning this desk as I go but the problem I am having is that after controlling a dimmer channel using the key pad and wheel and then controlling the brightness of a fixture again with the wheel, the dimmer channel remains controlled as well.

I can't work out how to make the controller forget the dimmer when I move to a fixture.

 

Probably missing something obvious here, I usually am, but it would be a great help to know where I am going wrong.

[Edward Z88]

Hi Terry,

 

After controlling your dimmer channel with the keypad/ wheel you have to press ENTER, then when you select your fixtures you will only adjust their intensity.

 

Hope that helps

Edward

[terryb]

Sorry for the delay in replying. Thank you for your reply, I did work it out eventually, exhaustion, as so often happens meant that I wasn't thinking correctly.

I was impressed by the desk, I had 28 fixtures varying from movers to geysers to a projector dowser. Once I got it all up and running it was a joy.

Thanks again.

Terry

[Edward Z88]

Sorry for the delay in replying. Thank you for your reply, I did work it out eventually, exhaustion, as so often happens meant that I wasn't thinking correctly.

I was impressed by the desk, I had 28 fixtures varying from movers to geysers to a projector dowser. Once I got it all up and running it was a joy.

Thanks again.

Terry

 

No worries glad you got it all up and running!

 

Edward