Uriahdemon Posted June 25, 2017 Report Share Posted June 25, 2017 Hi, I have selected a fixture (Chauvet Intimidator Hybrid 140SR) and looking at the colour palettes. When using Auto nothing is created. I went on to manually create colour palettes and name them but I dont get the colour indicators (colour slashes) which is what I really want. Same kind of question for getting gobo logos on the pallet buttons......?? Can anyone help please...?? Quote Link to comment Share on other sites More sharing options...
kgallen Posted June 25, 2017 Report Share Posted June 25, 2017 There is information missing from the fixture profile. In the PC fixture profile editor: Under colour, the 'special' setting needs to be set eg 'red - positive'. The gobo images have to be uploaded to the 'detail' tab in Beamshape. Quote Link to comment Share on other sites More sharing options...
Uriahdemon Posted June 25, 2017 Author Report Share Posted June 25, 2017 There is information missing from the fixture profile. In the PC fixture profile editor: Under colour, the 'special' setting needs to be set eg 'red - positive'. The gobo images have to be uploaded to the 'detail' tab in Beamshape. Thanks for that, I will experiment tonight. Much appreciated !! Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted June 25, 2017 Report Share Posted June 25, 2017 Hi Uriah, Kevin's right you've got a basic version of the fixture profile. If you can wait until tomorrow I can send you the full versions of the 2 channel modes for that fixture which have already been made. Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Edward Z88 Posted June 25, 2017 Report Share Posted June 25, 2017 The latest Global Fixture Library (version 33) is now on the website, and the Chauvet Intimidator Hybrid 140SR is included in it... http://zero88.com/support/index.php?/Knowledgebase/Article/View/440/ Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Uriahdemon Posted June 26, 2017 Author Report Share Posted June 26, 2017 The latest Global Fixture Library (version 33) is now on the website, and the Chauvet Intimidator Hybrid 140SR is included in it... http://zero88.com/support/index.php?/Knowledgebase/Article/View/440/ Edward Thanks Ed, I am assuming V33 has the more up to date fixture file for this since you point it out. I will download and update the desk now. Thanks for your help Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted June 26, 2017 Report Share Posted June 26, 2017 Yep that's both channel modes with full information included for that fixture. Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Uriahdemon Posted June 26, 2017 Author Report Share Posted June 26, 2017 Yip... just loaded it on the desk and thanks very much ED. To get the Gobo Logos, do I need to do that myself in the fixture editor...?? Quote Link to comment Share on other sites More sharing options...
kgallen Posted June 26, 2017 Report Share Posted June 26, 2017 Yip... just loaded it on the desk and thanks very much ED. To get the Gobo Logos, do I need to do that myself in the fixture editor...?? Oh Ed, have you done half a job?! Hi Uriah, Yes unfortunately this has to be done in the PC Fixture Editor. I'm not sure if there is a better way, but it can be a bit of a drag. I usually find a PDF of the manual that contains pictures of the gobos, make a tight screen grab of each gobo image and then use these. In the Fixture Editor, you need to upload each image against the DMX range for the gobo within the "Details" tab of the Beamshape parameter that is handling the gobo channel. I hope that is enough detail for you - sorry about my terse earlier post - I was using my phone! Regards, Kevin Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted June 26, 2017 Report Share Posted June 26, 2017 Oh Ed, have you done half a job?! Hi Uriah, Yes unfortunately this has to be done in the PC Fixture Editor. I'm not sure if there is a better way, but it can be a bit of a drag. I usually find a PDF of the manual that contains pictures of the gobos, make a tight screen grab of each gobo image and then use these. In the Fixture Editor, you need to upload each image against the DMX range for the gobo within the "Details" tab of the Beamshape parameter that is handling the gobo channel. I hope that is enough detail for you - sorry about my terse earlier post - I was using my phone! Regards, Kevin Yep Kevin is right it does take quite a while to add in detail for every gobo, however the fixture in the new library has all the detail included so you won't need to edit the file. To see it's gobos, tap the button in the middle of the gobo encoder. Hope that helps Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Uriahdemon Posted June 27, 2017 Author Report Share Posted June 27, 2017 Thanks Ed, I have downloaded the new fixture library and selected the Chauvet Intimidator Hybrid 140SR. When selecting the colour palette and auto create the colour pallets are there so thanks very much. Unfortunately when selecting beam for the gobo's I hit the middle encoder for gobo and nothing there....?? Quote Link to comment Share on other sites More sharing options...
Uriahdemon Posted June 27, 2017 Author Report Share Posted June 27, 2017 Oh Ed, have you done half a job?! Hi Uriah, Yes unfortunately this has to be done in the PC Fixture Editor. I'm not sure if there is a better way, but it can be a bit of a drag. I usually find a PDF of the manual that contains pictures of the gobos, make a tight screen grab of each gobo image and then use these. In the Fixture Editor, you need to upload each image against the DMX range for the gobo within the "Details" tab of the Beamshape parameter that is handling the gobo channel. I hope that is enough detail for you - sorry about my terse earlier post - I was using my phone! Regards, Kevin Thanks for your help Kevin, much appreciated mate. Terse response did not end up on my CONCERNED radar LOL. I see you are down in Chepstow, not far from me. I may personal message you with a request if that is OK and if I can work out how to do it. Rgds Mac Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted June 28, 2017 Report Share Posted June 28, 2017 Hi Mac, Just checked the profile and you're right this one must have slipped through without Gobo data being included. I'll go ahead and add that in now and post back with the updated file. Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Edward Z88 Posted June 28, 2017 Report Share Posted June 28, 2017 Please find attached the updated fixture file for the Chauvet Intimidator Hybrid 140SR (19 channel Mode). Chauvet Intimidator Hybrid140SR.ift When you select your "M1" fixture, there will be a few 19 channel variants, you will want the last one. Hope this helps Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Uriahdemon Posted June 28, 2017 Author Report Share Posted June 28, 2017 Thanks very much Ed, working a treat, much appreciated !!!! Three forward and only one back now..... traction is developing....... fingers crossed !! Rgds Mac Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted June 28, 2017 Report Share Posted June 28, 2017 No worries, any problems or queries just post! Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Uriahdemon Posted June 30, 2017 Author Report Share Posted June 30, 2017 Please find attached the updated fixture file for the Chauvet Intimidator Hybrid 140SR (19 channel Mode). Chauvet Intimidator Hybrid140SR.ift When you select your "M1" fixture, there will be three 19 channel variants, you will want the last one. Hope this helps Edward Hi Ed, I am trying to update PhantomOS at home but cannot seem to get the latest fixture file with colours and gobo's that are in this file. You mention selecting M1..... what does that mean please,>>>// Quote Link to comment Share on other sites More sharing options...
kgallen Posted June 30, 2017 Report Share Posted June 30, 2017 Sounds like he's made a number of different fixture definitions for the different modes of the device. Within the fixture assignment do you not see one called "M1"? Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted June 30, 2017 Report Share Posted June 30, 2017 Hi Mac, Make sure you have updated your PhantomZerOS Fixture Library to v33. Then under CHAUVET -> there will be Int.Hybrid 140SR M1-> under which will be two 19-Channel modes, and the fixture I made you is one of those. Hope that helps Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Uriahdemon Posted July 2, 2017 Author Report Share Posted July 2, 2017 All good on that now thanks Ed. One thing I do note is that when I have this fixture selected and looking at the colour pallets there are a number not blue i.e. Orange for example. How do I create orange on the desk and get it into that palette please..?? Rgds Mac Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted July 2, 2017 Report Share Posted July 2, 2017 Hi Mac, I believe the Intimidator Hybrid 140SR doesn't have an Orange slot in its colour wheel, therefore the desk can't apply a palette to it. However to add colour wheel slots to Auto Palettes you can simply manually change the colour wheel with the encoders, press UPDATE, and tap an Auto Palette. Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Uriahdemon Posted July 2, 2017 Author Report Share Posted July 2, 2017 Hi Mac, I believe the Intimidator Hybrid 140SR doesn't have an Orange slot in its colour wheel, therefore the desk can't apply a palette to it. However to add colour wheel slots to Auto Palettes you can simply manually change the colour wheel with the encoders, press UPDATE, and tap an Auto Palette. Edward Thanks Ed, on changing the colour wheel I only get the colours already on the palette. I am assuming you mean there is some where to get into the RGB levels and set something suitable but I am stuffed to be able to find it mate...?? Quote Link to comment Share on other sites More sharing options...
Edward Z88 Posted July 2, 2017 Report Share Posted July 2, 2017 The way that the console knows how to apply colour wheels to the auto-palettes is within the "Details" tab when creating the fixture, where you can set RGB values for each slot of the colour wheel. If you download the Fixture Editor software from the website you will be able to load the fixture in and see the RGB values applied for each colour slot in the Colour Wheel Details. Hope that helps Edward Quote Edward Smith Product Specialist Email Support Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.