terryb Posted February 3, 2017 Report Posted February 3, 2017 When working with 3 pages of fixtures and programming under pressure it is not uncommon for a fixture to be left selected, or when needing to change the fixture selection, it would be great to have a 'deselect all'button. I was wondering if this could be engineered in a software update because it would have to use an existing button. (Or something on a keyboard?) Quote
Jon Hole Posted February 3, 2017 Report Posted February 3, 2017 Pressing the Clear button once (if something's selected) will deselect everything Quote Jon Hole Global Product Manager, Systems and Control
terryb Posted April 22, 2017 Author Report Posted April 22, 2017 Er no it doesn't. Sorry to be so long in replying but I haven't been near the desk for a while. What I want to be able to do is release all selected fixtures in one go. Pressing the clear button has no effect on selected fixtures as far as I can see. Maybe I am missing something. Quote
Edward Posted April 22, 2017 Report Posted April 22, 2017 Hi Terry, I believe Jon's instruction is for the ZerOS rage of consoles. This feature is not currently there, however skipping through your active fixture pages and pressing and holding the first MFK of each page and pressing the last is the quickest way to select/ deselect all. Edward Quote
Jon Hole Posted April 22, 2017 Report Posted April 22, 2017 Apologies, yes - I replied via my phone where it's not so obvious to see which forum you posted in. With the relatively small number of fixtures available, this isn't a feature available in the Jester software. We'll certainly make a log of the request, but we haven't done feature development on the Jester software for several years - only bug fixes and sustain projects. Quote Jon Hole Global Product Manager, Systems and Control
ziglight Posted April 24, 2017 Report Posted April 24, 2017 Hello I don't have a Jester-ML (so I can't verify); here is my question : selection of a single fixture is done by pressing a MFK multiple selection of a range of fixtures is done by pressing multiples MFKs one after another (= addition), or pressing the first and the last MFK of the given range with other consoles (example ETC) a double-click on a given MFK select this given fixture but deselects also all the others... is this also that way it works on Jester-ML consoles ??? in the case of "yes"; the "deselect-all" function would be : double-click on a "not selected" MFK (it turns "selected"); then hit it once again and your done....all fixtures will be "deselected" Quote
Edward Posted April 24, 2017 Report Posted April 24, 2017 is this also that way it works on Jester-ML consoles ??? Hello, No this isn't how it works on the Jester ML consoles, doing this will simply deselect and reselect that particular fixture. Edward Quote
JB97 Posted April 25, 2017 Report Posted April 25, 2017 Stupid Question, Jon is it not possible to add a quick thing in Jester Software where pressing clear a few times (say twice) deselects everything? I'm going to say though I haven't been near the ML for a while so I don't remember what that does (if anything) currently. Quote
Jon Hole Posted April 25, 2017 Report Posted April 25, 2017 It's not a stupid question, but we shouldn't underestimate the work involved in writing the specification, developing the software and then extensively testing it on all 5 variants of the Jester range. Quote Jon Hole Global Product Manager, Systems and Control
JB97 Posted April 25, 2017 Report Posted April 25, 2017 It's not a stupid question, but we shouldn't underestimate the work involved in writing the specification, developing the software and then extensively testing it on all 5 variants of the Jester range. Yeah fair enough, it's me using Ma too much Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.