Primax98 Posted December 9, 2016 Report Posted December 9, 2016 http://www.prolight.co.uk/ftp-in/STRO12_Manual.pdf Hi, I have created a fixture file for this 2 channel device but it isn't behaving as it should. The speed control seems to control the intensity and the intensity control does nothing. Am I missing something here ? Equinox.ift Quote
Edward Posted December 9, 2016 Report Posted December 9, 2016 Hello, Give this one a go, it looks like you had the parameter numbers correct, however the DMX values were the wrong way round. Therefore when you tried Beamshape you got intensity, and when you tried intensity (actually beamshape) you didn't get anything as the intensity channel wasn't actually up. Edward Equinox.ift Quote
Primax98 Posted December 9, 2016 Author Report Posted December 9, 2016 Hi Edward appreciate the updated file however the speed control still isn't working :-/ VERY odd ! Will keep on it for now and see if I can remedy it. Cheers Paul Quote
Edward Posted December 9, 2016 Report Posted December 9, 2016 Sorry to hear that hasn't worked, I presume it's nothing as simple as checking the fixture is in the right channel mode and correct DMX address? I once used a Moonflower which DMX start address on the dip switches was actually an offset of +1 to what it should have been which confused me for a while! Edward Quote
Primax98 Posted December 9, 2016 Author Report Posted December 9, 2016 Hi Edward, good point. Checked the dip switches a few times over now. Re uploaded your fixture file and controls are now swapped over other than the speed issue. Given up for the day now and will have another go Sunday when next in. Thanks again for the help. Paul Quote
penlec Posted May 4, 2022 Report Posted May 4, 2022 Hi, Anybody know where I can pick up this manual? The link at the top of the conversation is no longer correct. Many thanks, Brett (Regal Theatre Minehead) Quote
Edward Z88 Posted May 4, 2022 Report Posted May 4, 2022 Hi @penlec 2 hours ago, penlec said: Anybody know where I can pick up this manual? The link at the top of the conversation is no longer correct. A quick Google provides the following product page... https://prolight.co.uk/product/firecracker-1500w-dmx-strobe There is a manual available to download from the "Resources" tab. The Zero 88 fixture file for this strobe can be downloaded from the link below... https://zero88.com/fixtures/legacy-library/Legacy library (gft41.0)/EQUINOX/Firecracker 1500w Strobe.ift Edward Quote Edward Smith Product Specialist Email Support
penlec Posted May 6, 2022 Report Posted May 6, 2022 Thanks Edward, I had found that but when you click on the pdf it is the same link as the original above thread and nothing is found. Brett Quote
Edward Z88 Posted May 6, 2022 Report Posted May 6, 2022 Hi Brett, I found this on another website... https://d1aeri3ty3izns.cloudfront.net/media/14/143194/download_143194_1.pdf Edward Quote Edward Smith Product Specialist Email Support
penlec Posted May 6, 2022 Report Posted May 6, 2022 That's great Edward and what a fast service you provide. Many thanks, Brett Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.