Requesting new fixture profiles

[Jon Hole]

As part of our aim to improve fixture support across the Zero 88 range, there's a new, single way of requesting fixture profiles from Eaton.

However, first, please ensure we don't already support the fixture you require:

Please ensure you've updated to the latest fixture library, which can be downloaded from this link: http://zero88.com/software/library

 

A full list of the currently supported fixtures can be found here: http://zero88.com/support/index.php?/Knowledgebase/Article/View/581/

 

The Zero 88 Fixture Tools also allow you to create a custom profile yourself, and load it into your console: http://zero88.com/support/index.php?/Knowledgebase/Article/View/49/

 

If the above options are not suitable, a new email address has been setup for requesting profiles:

 

FixtureSupport@Zero88.com

 

Please ensure you supply full details of the fixture (Make, Model, Mode etc) and a download link to the Operating Manual.

[Jolyon]

We have 8 LEDJ stage colour quad fixtures which are used as both houselights and a colour wash on our main stage. I cannot find these in the fixture library. Have they been deleted as obsolete or were they never there. It is essential that we have these available to our new S 48 for obvious reasons. I have tried the links both to the full fixture list and the article on creating a custom fixture, but without response. Could you advise please.

Edited July 24, 2019 by Jon Hole
This post didn't need to be all bold

[Jon Hole]

11 hours ago, Jolyon said:

We have 8 LEDJ stage colour quad fixtures which are used as both houselights and a colour wash on our main stage. I cannot find these in the fixture library. Have they been deleted as obsolete or were they never there. It is essential that we have these available to our new S 48 for obvious reasons. I have tried the links both to the full fixture list and the article on creating a custom fixture, but without response. Could you advise please.

If you email us, as per the above instructions, we can get it made for you

[Jolyon]

These were manufactured by Prolight Concepts Group Ltd, but are now discontinued. However, ours work very well and probably will continue in use for several years yet. The model is LEDJ stage colour quad and it has four modes - 4 channel, 6 channel, 12 channel and 15 channel. The last two which we are unlikely to use are sound operated. The manual can be downloaded from the Prolight Concepts Group site as a pdf (LEDJ107_manual.pdf). The file however is only 1.01mb which is within your maximum file and I am attaching it below. Hope this OK.

LEDJ107_manual.pdf

Edited July 24, 2019 by Jon Hole
Again, this post didn't need to be all bold

[Jon Hole]

On 11/14/2016 at 1:16 PM, Jon Hole said:

there's a new, single way of requesting fixture profiles from Eaton.

 

On 11/14/2016 at 1:16 PM, Jon Hole said:

a new email address has been setup for requesting profiles:

FixtureSupport@Zero88.com

 

20 hours ago, Jon Hole said:

If you email us, as per the above instructions, we can get it made for you

Thanks Jolyon, please email all that information, including the attachment, to the team so they can create it for you.