Chauvet Beam LED 350 Z88 Profile

[Weir69]

Hi all,

I'm doing a show in a venue that has a Jester ML 24. On the rig there are 2 Chauvet Beam LED 350s that are not patched into the console. Also there does not appear to be a profile for said fixtures under Chauvet category even though a quick internet search says that there should be one. Does anyone know if there is?

Also if not I would greatly appreciate if somebody could make one up for me, I've not used the software before and have very limited time in the venue so I would like to be sure it will work.

 

Thanks!

[kgallen]

Can you point me at a manual and I'll have a go. Chauvet have a "Beam" and a "Spot". You say "Beam" but then "Profile" which means I'm not sure which model you really mean.

 

This (Beam LED 350):

 

http://www.chauvetlighting.co.uk/products/manuals/Intimidator_Beam_LED_350_UM_Rev3_WO.pdf

 

or this (Spot LED 350):

 

http://www.chauvetlighting.co.uk/products/manuals/Intimidator_Spot_LED_350_UM_Rev8_WO.pdf

 

...or something else entirely!

[Weir69]

Hi I mean the Beam 350 LED. By profile I was meaning the file that the console reads.

 

Thanks alot

[kgallen]

Wow, that was a busy one. Give this a go...

 

Regards,

Kevin

Chauvet_Beam_350.ift

[Weir69]

Great!

I'll give it a shot tommorow and let you know how it goes.

 

Thanks again,

Hamish

[Weir69]

Thank you, tried today and it appears to work perfectly.

Sorry I also should have told you I was using them in 14channel configuration.

[kgallen]

Cheers, Hamish, glad it worked ok!

Regards,

Kevin