luke1307 Posted September 20, 2015 Report Share Posted September 20, 2015 Hi all. I am new to Zero88 consoles and just having a little problem with my FLX, I am due to programme a show so an untrained person can operate the console using purely the master playback go button, it will let me record to the fader but when I press the go button nothing happens, I have tried the playback settings but nothing seems to work, any help would be appreciated. Thanks Luke Quote Link to comment Share on other sites More sharing options...
Lufferov Posted September 20, 2015 Report Share Posted September 20, 2015 Covering the very obvious first, but you do have the playback master up don't you? Quote Link to comment Share on other sites More sharing options...
luke1307 Posted September 20, 2015 Author Report Share Posted September 20, 2015 Haha yea the play back master is up Quote Link to comment Share on other sites More sharing options...
Jon Hole Posted September 20, 2015 Report Share Posted September 20, 2015 Hi Luke, Make sure the programmer is empty - you do this by pressing "CLEAR" twice. The programmer "always wins", and so if there's a load of "0%" under all the channels (which will be shown in red) then this might be the cause. This often happens when programming from channel faders, as once you're finished recording you pull all the channels to 0% - putting lots of "0%" info into the programmer which need to be cleared before playback. Jon Quote Jon Hole Global Product Manager, Systems and Control Link to comment Share on other sites More sharing options...
luke1307 Posted September 20, 2015 Author Report Share Posted September 20, 2015 Thanks Jon will try tomorrow, loving the console so far, any update on the fixture profile? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.