Steven Posted October 1, 2014 Report Share Posted October 1, 2014 What IP-ranges are allowed to use for ArtNet on a Leap Frog 48? The ones I tried to use so far all gave me the notice it aint a valid ArtNet address (I tried this in PhantomZerOS 7.8) Quote Link to comment Share on other sites More sharing options...
mikeb Posted October 1, 2014 Report Share Posted October 1, 2014 Hiya Artnet is quite new to me but I have had some success with it Firstly, I may be wrong but unless you have the DMX unlock dongle I don't believe that PhantomZerOS will output any Artnet For both Phantom and Console, the Artnet node and consoles are connected to a switch/router (mine is a router with IP address: 10.10.0.254) The settings I have for Phantom ZerOS is; Via Node Management Utility for Entec Artnet: IP address 10.10.0.101, Protocol: Artnet, Subnet: 0, Universe: 0, Port Direction: Output DMX The Artnet settings on the console are; Net: 0, Subnet: 0, Port 1: 0 and Universe 1 and Transmit Artnet: Yes The console is a little different :| I have the Remote IP address: 10.10.0.1, Subnet: 255.255.0.0 and the same Artnet settings as for the Phantom ZerOS. I see the Artnet screen says "transmit on 2.109.14.193 but it still sends the the Artnet to my unit which is on the 10.xx address I hope this is of use I welcome any comments or clarification if I am missing something Mike Quote Link to comment Share on other sites More sharing options...
Franck Posted October 2, 2014 Report Share Posted October 2, 2014 Artnet User Guide from Artistic Licence: http://www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.