mover level won't store at zero

[charles]

I'm running a show with 6 movers - all Martin MACs - one, & only one, won't stay with intensity zero. It keeps coming up at 30%. makes blackouts rather difficult.

 

any ideas?

[Jon Hole]

Hi Charles,

 

Does the Output Window of the fixture say 30%, or does the console think it's at 0%?

 

Best regards

 

Jon

[charles]

Console says 30%

[Jon Hole]

In the Output Window, there is a button called "Source" - if you press that, instead of telling you the intensity, the Output Window will tell you why the fixture is at that intensity.

 

What does the 30% change to when you press Source?

[charles]

Just back from theatre - I'll look when I go back.

[charles]

I can't see any button marked "Source".

[ziglight]

I can't see any button marked "Source".

this is on the screen (soft-button)

in the top of the output-window

[Jon Hole]

Make sure you are looking at the "Output Window", not the "Programming Window".

 

[charles]

Ah. It said S1/1. The fixture must have been selected when I programmed the Sub. Reprgrammed that and problem seems to have gone.

[Jon Hole]

Great :-)