Keyboard entry with Leapfrog 48

[NickTaylor]

We have just programmed a show and then decided to retrospectively name cues. For some reason tabbing through does not stop on the Description column. Any ideas? If a bug then it stays until after the show!

[iank99]

Which version of ZerOS are you using - I've just tried it on Phantom ZerOS and it seems to work OK (not saying that's a guarantee but I think the core is the same as on the consoles)?

[Jon Hole]

Ian's correct - it's the same code, so it's very rare that something user-interface related, such as this, will operate differently on a console compared to Phantom ZerOS.

 

This seems to work fine for me in Zero 7.8.

[NickTaylor]

Tried the F2 trick and all that comes up is a box with the ability to cancel out of it, without any keyboard strokes working!

[Jon Hole]

Ahh I see the problem here... you've got the old Leapfrog console, not the replacement Leap Frog 48 console.

 

Which version of software are you running?

[kgallen]

Naming retrospectively is the same as if you were doing it as you are programming. Sorry if you already know the following and I missed the point of the question. The following works on the Phantom Frog Leapfrog setting with software 10.12 (latest). I don't think this functionality changed across software versions.

 

<F2>

 

Dialog Box=Select type of item to name

 

<Memories>

 

Dialog Box=Select Memory Number

 

<Enter> or type number

 

Dialog Box=Name Item

 

<type name using keyboard><Enter>

 

Job done!

[NickTaylor]

It is an original Leapfrog. Its not been over used but about ten years old. I will check the tips from kgallen!

My main desk is a Frog2 where its all a bit more straight forward!

[kgallen]

Nick, its possible on the Leapfrog that F2 is labeled 'Name', but certainly on Phantom Frog Leapfrog setting its in the same position on the console as F2 would be on a Fat Frog. i.e 2nd button from the left on the very top row of buttons above the Master A/B faders. Kevin