NickTaylor Posted May 6, 2014 Report Posted May 6, 2014 We have just programmed a show and then decided to retrospectively name cues. For some reason tabbing through does not stop on the Description column. Any ideas? If a bug then it stays until after the show! Quote
iank99 Posted May 6, 2014 Report Posted May 6, 2014 Which version of ZerOS are you using - I've just tried it on Phantom ZerOS and it seems to work OK (not saying that's a guarantee but I think the core is the same as on the consoles)? Quote Ian Knight aka The Service Guy - www.serviceguy.co.uk
Jon Hole Posted May 6, 2014 Report Posted May 6, 2014 Ian's correct - it's the same code, so it's very rare that something user-interface related, such as this, will operate differently on a console compared to Phantom ZerOS. This seems to work fine for me in Zero 7.8. Quote Jon Hole Global Product Manager, Systems and Control
NickTaylor Posted May 8, 2014 Author Report Posted May 8, 2014 Tried the F2 trick and all that comes up is a box with the ability to cancel out of it, without any keyboard strokes working! Quote
Jon Hole Posted May 9, 2014 Report Posted May 9, 2014 Ahh I see the problem here... you've got the old Leapfrog console, not the replacement Leap Frog 48 console. Which version of software are you running? Quote Jon Hole Global Product Manager, Systems and Control
kgallen Posted May 12, 2014 Report Posted May 12, 2014 Naming retrospectively is the same as if you were doing it as you are programming. Sorry if you already know the following and I missed the point of the question. The following works on the Phantom Frog Leapfrog setting with software 10.12 (latest). I don't think this functionality changed across software versions. <F2> Dialog Box=Select type of item to name <Memories> Dialog Box=Select Memory Number <Enter> or type number Dialog Box=Name Item <type name using keyboard><Enter> Job done! Quote
NickTaylor Posted May 12, 2014 Author Report Posted May 12, 2014 It is an original Leapfrog. Its not been over used but about ten years old. I will check the tips from kgallen! My main desk is a Frog2 where its all a bit more straight forward! Quote
kgallen Posted May 12, 2014 Report Posted May 12, 2014 Nick, its possible on the Leapfrog that F2 is labeled 'Name', but certainly on Phantom Frog Leapfrog setting its in the same position on the console as F2 would be on a Fat Frog. i.e 2nd button from the left on the very top row of buttons above the Master A/B faders. Kevin Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.