CallumAllan Posted March 2, 2014 Report Posted March 2, 2014 hello, In school we run 4 movers on an ML board winged with 24/48. We program the 24/48 in with the movers on one scene or chase, occasionally we have to take out some lights at last minute but is there anyway to edit the 24/48 input on the ML board? It's setup as a snapshot, do I have to change this? Thanks, Callum Quote Jester ML v3.3 winged with Jester 24/48 v3.4 4x Clay Paky - Alpha Spot 300 48x 1 Channel Fixtures
iank99 Posted March 3, 2014 Report Posted March 3, 2014 I've just had a quick mooch in the manual because you're question intrigued me (we've never sold Jester ML's with wings) and my reading is that you would need to be in Chans+Subs mode ideally as this would likely give you the fader movements needed to do memory editing. I'm guessing (and Jon or Keith will say if I'm wrong) that Snapshot only grabs the current value of a DMX channel and doesn't "sense" any change in values. Quote Ian Knight aka The Service Guy - www.serviceguy.co.uk
Jon Hole Posted March 4, 2014 Report Posted March 4, 2014 I'm guessing (and Jon or Keith will say if I'm wrong) that Snapshot only grabs the current value of a DMX channel and doesn't "sense" any change in values. Correct :-) Quote Jon Hole Global Product Manager, Systems and Control
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.