ML48 Can't edit submenus

[CHIPS]

Ihave used this desk in the past and edited scenes in various ways successfully. For simplicity the current show is programmed as scenes in the submasters ( timing being entirely unpredictable at time of writing). Al attempts to edit these scenes are failing. The process appears to be working but the scenes emerge unchanged. I have checked on the Phantom to ensure that my procedures are correct and that works. I have now made changes in phantom and loaded that as the show but there are some colour balances I can only get right visually and the board will not let me. Before I record the board as malfunctioning is there anything I should try. Show is tonight and I intend to be well Coffeed up and deal with problems on the hoof. How i miss "top set"

[KWR88]

To edit a sub if you go into run and play it back then jump to program with it active it will be outputting the channels info. Make the change then re-program the sub you want and over write it. then go back to run again.

[CHIPS]

I'll try that next time round (if). Is that procedure in the manual ? Cheers